Blue Screen error Pagefault In Nonpage Area (help please)

I keep getting this blue screen about every hour. Sometimes less.
I havent installed any new hardware or software. I've ran ccleaner, tuneup utilities 2006, and diskeeper.

I still get it. Can somebody please help? I've attached my minidump. I don't know how to read it. Thanks

Turn off your PC and pull out the RAM, just install half your RAM and test that out. If it does the same, shutdown the system again. Remove the RAM and try using the RAM you had taken out. Test and see what happens? If nothing happens then you know you got bad RAM.

You should really run a diagnosic program running a dos bootdisc CD and test out things like RAM, VIDEO, CPU

run memtest86.
use your floppy drive. if you don't have one, install one.contrary to popular notion, they're still a requirement.

i've ran memtest and dft hard drive test


i've also tested with 1 mem card at a time and i got blue screen with both.

does anybody know how to read a minidump?

Hi,

One miniump is insufficient to determine the culprit. You must zip 5 to 6 minidumps and attach the zip file here. Your minidumps shows that it is faulty rama as the bucket id is 0x50_BADMEMREF_nt!ObpRemoveObjectRoutine+cb and this is the sigh of faulty ram.


PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: bad0b148, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 8056c77b, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name
READ_ADDRESS: bad0b148

FAULTING_IP:
nt!ObpRemoveObjectRoutine+cb
8056c77b 833800 cmp dword ptr [eax],0x0

MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x50
LAST_CONTROL_TRANSFER: from 8057f04c to 8056c77b

STACK_TEXT:
f78bed64 8057f04c 899e8558 00000001 80567c20 nt!ObpRemoveObjectRoutine+0xcb
f78bed7c 804e23b5 00000000 00000000 89bfa7a8 nt!ObpProcessRemoveObjectQueue+0x36
f78bedac 80574128 00000000 00000000 00000000 nt!ExpWorkerThread+0xef
f78beddc 804efc81 804e22f1 00000000 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16


FOLLOWUP_IP:
nt!ObpRemoveObjectRoutine+cb
8056c77b 833800 cmp dword ptr [eax],0x0

SYMBOL_STACK_INDEX: 0
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: nt!ObpRemoveObjectRoutine+cb
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 42250f77
STACK_COMMAND: kb
FAILURE_BUCKET_ID: 0x50_BADMEMREF_nt!ObpRemoveObjectRoutine+cb <- faulty ram
BUCKET_ID: 0x50_BADMEMREF_nt!ObpRemoveObjectRoutine+cb
Followup: MachineOwner

ok, i attached a zip with 5 minidumps.

i tried 6 but it went over 100kb.


so it's possible that both my mem cards are bad all of a sudden? :(

Vsdatant.sys,which is a Zonealarm file.Either check for an update or remove to see if problem goes away.

Hi MistaRip,

I believe that the culprit is faulty ram. One minidump may be crashed by ZA and your timestamp of your version of ZA is 43798224. I search google and there has no hit relating to this version has known bug. Anyway you can un-install ZA and install sygate firewall for problem isolation.

Mini020706-02.dmp BugCheck 10000050, {bad0b148, 0, 8056c77b, 0} <-- Faulty ram
Probably caused by : ntkrnlmp.exe ( nt!ObpRemoveObjectRoutine+cb )

Mini020706-03.dmp BugCheck C2, {7, cd4, 2060001, 877f28c0} <-- Faulty ram or software error at ZA
Probably caused by : vsdatant.sys ( vsdatant+3e6e1 )

Mini020706-04.dmp BugCheck C2, {7, cd4, 2130013, 83cb1538} <-- Faulty ram
Probably caused by : ntkrnlmp.exe ( nt!ExFreePoolWithTag+2c1 )

Mini020706-05.dmp BugCheck C2, {40, 0, 80000000, 0} <- Faulty ram
Probably caused by : ntkrnlmp.exe ( nt!ObpFreeObject+142 )

Mini020706-01.dmp BugCheck 10000050, {bad0b148, 0, 8056c77b, 0} <-- Faulty ram
Probably caused by : ntkrnlmp.exe ( nt!ObpRemoveObjectRoutine+cb )

run memtest86 overnight for at least 7 passes. what where the results?

thanks for the help, everybody.

the problem was zonealarm

i uninstalled it and haven't had the blue screen ever since

i cant believe it. oh well.. i just use the firewall on netlimiter 2 and it works fine


tedster, i did the memtest overnight and got no errors

i got this error code exactly as well for my bluescreen, i also had been having problems with the internet locking up during the night. apparently zone alarm was the culprit. i installed kerio (though i dislike its negative effect on the performance of my computer in comparison) it doesnt have any problems anymore and has not bluescreened since.

I'm having this same, well i say same, its a blue screen of death Pagefault In Nonpage Area error, but need to zip the minidumps and that really, but how do you do them?

I need an idiots guide really. Where are they? How do you read them? I need to know everything as i've never heard of them before, please..

Thanks