i have learnt that any time am using my A.C of laptop the hanging is very fast and and frequent and i have also noticed that when i start the fan will role for some minute and after that it will stop again and it will not role again here are the error

Event Type: Error
Event Source: Cdrom
Event Category: None
Event ID: 11
Date: 8/24/2008
Time: 1:31:42 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The driver detected a controller error on \Device\CdRom0
Data:
0000: 00 01 68 00 01 00 b8 00 ..h...¸.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 01 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 0a 08 00 00 00 00 00 00 ........
0030: ff ff ff ff 02 00 00 00 ÿÿÿÿ....
0038: 40 00 00 c4 02 00 00 00 @..Ä....
0040: 00 00 0a 12 48 00 00 00 ....H...
0048: 00 00 00 00 0a 00 00 00 ........
0050: 90 f0 2d 82 58 95 2a 82 �ð-?X?*?
0058: 00 00 00 00 70 1e 04 82 ....p..?
0060: 00 00 00 00 00 00 00 00 ........
0068: 25 00 00 00 00 00 00 00 %.......
0070: 00 00 00 00 00 00 00 00 ........
0078: 70 00 04 00 00 00 00 0a p.......
0080: 00 00 00 00 40 86 00 00 ....@?..
0088: 00 00 00 00 00 00 00 00 ........

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 8/24/2008
Time: 1:31:48 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The following boot-start or system-start driver(s) failed to load:
ShldDrv


Event Type: Error
Event Source: Software Update Services Client
Event Category: Software Sync
Event ID: 149
Date: 8/22/2008
Time: 10:36:17 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.


Data:
0000: 57 69 6e 33 32 48 52 65 Win32HRe
0008: 73 75 6c 74 3d 30 78 30 sult=0x0
0010: 30 30 30 30 30 30 30 20 0000000
0018: 55 70 64 61 74 65 49 44 UpdateID
0020: 3d 7b 30 30 30 30 30 30 ={000000
0028: 30 30 2d 30 30 30 30 2d 00-0000-
0030: 30 30 30 30 2d 30 30 30 0000-000
0038: 30 2d 30 30 30 30 30 30 0-000000
0040: 30 30 30 30 30 30 7d 20 000000}
0048: 52 65 76 69 73 69 6f 6e Revision
0050: 4e 75 6d 62 65 72 3d 30 Number=0
0058: 20 43 6c 69 65 6e 74 56 ClientV
0060: 65 72 73 69 6f 6e 3d 35 ersion=5
0068: 2e 34 2e 33 37 39 30 2e .4.3790.
0070: 32 30 39 36 20 00 2096 .


Event Type: Error
Event Source: Setup
Event Category: None
Event ID: 60055
Date: 8/20/2008
Time: 2:37:19 PM
User: N/A
Computer: OWNER-5599D1C22
Description:
Windows Setup encountered non-fatal errors during installation. Please check the setuperr.log found in your Windows directory for more information.


Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 8/20/2008
Time: 2:28:31 PM
User: NT AUTHORITY\SYSTEM
Computer: OWNER-5599D1C22
Description:
DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service SENS with arguments "" in order to run the server:
{D3938AB0-5B9D-11D1-8DD2-00AA004ABD5E}

Thank you. I have arranged the Errors in consecutive date and time order:

i have follow the proccedure you gave to me but the error is still there but i noticed one thing in the proccess of typing these posted again i learnt that the proccessor fan start working
and stop again after few minute

Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 8/24/2008
Time: 6:52:31 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
Hanging application wmplayer.exe, version 9.0.0.3133, hang module hungapp, version 0.0.0.0, hang address 0x00000000.


Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 48 61 6e 67 ion Hang
0010: 20 20 77 6d 70 6c 61 79 wmplay
0018: 65 72 2e 65 78 65 20 39 er.exe 9
0020: 2e 30 2e 30 2e 33 31 33 .0.0.313
0028: 33 20 69 6e 20 68 75 6e 3 in hun
0030: 67 61 70 70 20 30 2e 30 gapp 0.0
0038: 2e 30 2e 30 20 61 74 20 .0.0 at
0040: 6f 66 66 73 65 74 20 30 offset 0
0048: 30 30 30 30 30 30 30 0000000


Event Type: Error
Event Source: LoadPerf
Event Category: None
Event ID: 3001
Date: 8/20/2008
Time: 2:24:29 PM
User: N/A
Computer: OWNER-5599D1C22
Description:
The performance counter name string value in the registry is incorrectly formatted. The bogus string is 2352, the bogus index value is the first DWORD in Data section while the last valid index values are the second and third DWORD in Data section.


Data:
0000: 30 09 00 00 2e 09 00 00 0.......
0008: 2f 09 00 00 97 02 00 00 /...—...

another one again

Event Type: Error
Event Source: PlugPlayManager
Event Category: None
Event ID: 12
Date: 8/24/2008
Time: 8:05:17 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.


Data:
0000: 00 00 00 00 ....

It is likely you have a heat-related issue.

Most of the Errors you are reporting ave to do with the CD Drive
And this links the media player with it.
Event Type: Error, Source: Application Hang Event ID: 1002, Description: Hanging application wmplayer.exe,

Event Type: Error, Source: PlugPlayManager, Event ID: 12
Description: The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.

TEAC CD-224E Slimline CD-ROM Drive TEAC is an Internal tray-loading CD-ROM drive with fast transfer rate;
Are you using a removable device but not going through the 'safely remove hardware' steps? Other possible causes of this:
1. Loose connection in the power socket> Open up the computer and disconnecti and reconnect cables
2. The CDROM is taking too long to read the disk, or the firmware in the CDROM is causing the CDROM to become uncontrollable when certain CD's are inserted.

3. A NIC disappeared in device manager. However, it seems that certain laptop NICs have this feature built-in to save power. Plug in the external power-supply to enable the NIC again. Disabling this feature varies depending on the driver. On some HP NICs, it is in the driver itself (Device Manager). On some Dell NICs, it is in the Dell QuickSet application.

4. This event can occur when a drive that is part of a software RAID in Windows Server 2003 suddenly dies.

5. This event may be logged if high-volume disk I/O operations are performed and a time-out occurs while the LDM (Logical Disk Manager) is interacting with PNP (Plug and Play).

Make sure the CD Drive is empty when you boot up.
Uncheck any processes associated with the CD, WMP, PlugnPlay functions on the Startup menu.

For Error 3001, Source LoadPerf:
See Microsoft TechNet: http://tinyurl.com/5ljkcy

i have discover that the day you gave solution to the error i made a mistake of not changing it in safe mode but after i delete the shhlvd i discover that the fan roll very well later stop again pls when reply me i need details and deep support pls if there is need for me to change the cdrom tell me

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 9/2/2008
Time: 1:20:49 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The Panda Process Protection Service service failed to start due to the following error:
The system cannot find the path specified.


Event Type: Error
Event Source: Cdrom
Event Category: None
Event ID: 11
Date: 9/2/2008
Time: 1:15:47 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The driver detected a controller error on \Device\CdRom0.
Data:
0000: 00 01 68 00 01 00 b8 00 ..h...¸.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 01 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: d1 07 00 00 00 00 00 00 Ñ.......
0030: ff ff ff ff 02 00 00 00 ÿÿÿÿ....
0038: 40 00 00 c4 02 00 00 00 @..Ä....
0040: 00 00 0a 12 48 00 00 00 ....H...
0048: 00 00 00 00 0a 00 00 00 ........
0050: e0 8a 36 82 98 c9 3c 82 à?6??É<?
0058: 00 00 00 00 80 89 05 82 ....??.?
0060: 00 00 00 00 00 00 00 00 ........
0068: 25 00 00 00 00 00 00 00 %.......
0070: 00 00 00 00 00 00 00 00 ........
0078: 70 00 04 00 00 00 00 0a p.......
0080: 00 00 00 00 40 86 00 00 ....@?..
0088: 00 00 00 00 00 00 00 00 ........


Event Type: Error
Event Source: PlugPlayManager
Event Category: None
Event ID: 12
Date: 8/26/2008
Time: 8:10:52 AM
User: N/A
Computer: OWNER-5599D1C22
Description:
The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.
Data:
0000: 00 00 00 00 ....