![]() |
Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.
|
|||||||
Error: driver_iqrl_not_less_or_equal, please help
![]() |
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Error: driver_iqrl_not_less_or_equal, please help
hi friends..
my laptop gives an error saying DRIVER_IQRL_NOT_LESS_OR_EQUAL technical info: *** STOP: 0x000000D1 (0xF7AA3000, 0x00000002, 0x00000000, 0xB8B730EB) *** ipnat.sys - Address B8B730EB base at B8B6B000, DateStamp 41107c80 the laptop stops responding after this error and i have to reset it to make it work..! please help.. i have also attached an image of the error screen.. waiting for ur replies.. |
|
#2
|
||||
|
||||
|
Try replacing your memory, then if you can, test your hard drive for errors. If you can't do this by yourself, take it to a computer repair shop or to a computer savvy friend
|
|
|
|
#3
|
|||
|
|||
|
hi Tmagic650.. i appreciate ur help ,, but it din't work.. i checked the ram and the hard disk... no ram problem or harddisk error ! .. my laptop is normal otherwise.. this blue screen error comes like once in 2 days or so.. when i reset my laptop.. its back to normal.. any other help please.!!! :-(
|
|
#4
|
|||
|
|||
|
Someone else had the same error reported on this thread: [url]http://www.techspot.com/vb/showthread.php?p=585185&highlight=ipnat#post585185[/url]
Please take a look and see if that resolves your issue as well |
|
#5
|
|||
|
|||
|
i have downloaded and installed the windows debugging software.. but how to get those mini dump files???
|
|
#6
|
|||
|
|||
|
[COLOR="DimGray"]Read: [/COLOR] [URL="http://www.techspot.com/vb/post685896-5.html"]All about Minidumps and analyzing them[/URL]
[COLOR="DimGray"]Hint:[/COLOR] They are located in Start->Run-> [B]%windir%\Minidump[/B] folder (just copy and paste that into run) |
|
#7
|
|||
|
|||
|
thanks kimsland.. i dint find any files in tht mini dump folder.. okz let me read the link u provided..!
|
|
#8
|
|||
|
|||
|
ok
But it's probably disabled in System in Control Panel And then under dvanced Tab Then under Startup and Recovery |
|
#9
|
|||
|
|||
|
It is not disabled there!
but my system restore is turned off.. should i on it? actually when the blue screen error happens.. my laptop stops responding , then i press n keep the power button to force shut down.. and then reboot it again.. could this be the cause that there is no mini dump files in the folder? Last edited by kimsland; 01-25-2009 at 12:31 AM.. |
|
#10
|
|||
|
|||
|
It is possible to get no Minidump, due to System lockup
Also System Restore off is your choice (mines off) Try this: [B][COLOR="Blue"]Manual steps to run Chkdsk from My Computer or Windows Explorer[/COLOR][/B][list][*] Open [B]My Computer[/B], and then [B]right-click[/B] the hard disk that you want to check. [*] Click [B]Properties[/B], and then click [B]Tools[/B]. [*] Under Error-checking, click [B]Check Now[/B]. A dialog box that shows the Check disk options is displayed [/list][COLOR="Blue"]Use one of the following procedures[/COLOR]: [list][*] • To run Chkdsk in read-only mode, click Start.[*] • ([COLOR="Red"][B]tick[/B][/COLOR]) To repair errors without scanning the volume for bad sectors, select the Automatically fix file system errors check box. [*] • To repair errors, locate bad sectors, and recover readable information, select the Scan for and attempt recovery of bad sectors check box.[/list] [COLOR="Blue"]Note If one or more of the files on the hard disk are open, you will receive the following message:[/COLOR] Quote:
[B]Wait[/B] until Chkdsk finishes Checking / Repairing any faults Windows will then either restart your computer or continue loading Normally. |
|
#11
|
|||
|
|||
|
thanks.. let me try it..! ^_^
|
|
#12
|
|||
|
|||
|
i have checked my C: drive by the window's disk check utility..with both the disk check options ticked.. still nothing visible in mini dump folder.. i guess i have to wait till the error happens next time..!
another question is.. why din't my laptop restart even though automatically restart option is ticked in System failure options of Startup and Recovery after the error happened..? Can u guess out something from the image i have uploaded in my 1st post? |
|
#13
|
|||
|
|||
|
The screen dump says it got locked up on a faulty driver
Can be CMOS settings Can be Drivers, including Video Card Can be Ram faulting at a driver Can be programs such as Norton, or ZoneAlarm or Virtual software (by the way, if you have those, remove them) |
|
#14
|
|||
|
|||
|
i donot have any virtual softwares installed.. as antivirus i use NOD32.. by the way i keep my windows auto update OFF / firewall & virus protection ON in Windows Security Center..
this is a new laptop.. n i am really tensed by that error..! :-( |
|
#15
|
|||
|
|||
|
Lets try Turning Windows protection off
Start-Run-> Services.msc Locate Windows firewall, double click on it, change it to Disabled (and stop it, but that doesn't matter) Apply->ok Locate Security Center, double click on it, change it to Disabled (and stop it, but that doesn't matter) Apply->ok Restart, and test |
|
#16
|
|||
|
|||
|
did as u said.. n restarted..! but what should i test now?.. still no files in minidump folder.. should i wait for the error to happen again? then may b there will b something in that mini dump folder..
|
|
|
|
#17
|
|||
|
|||
|
Just wait and we'll see
By the way what firewall are you using again? |
|
#18
|
|||
|
|||
|
its windows xp's default firewall !
|
|
#19
|
|||
|
|||
|
Oh
Ok if you haven't had any lock-ups, for a normal amount of time (that it use to lockup on) Then turn on Windows firewall in Services |
|
#20
|
|||
|
|||
|
okay.. i turned on the Windows Firewall in services..!
|
![]() |
| Tags |
| iqrl |
| Thread Tools | |
|
|
| Similar Topics | ||||
| Topic | Category | Replies | Last Post | |
| The driver detected a controller error on \Device\CdRom0 error | Storage and Networking | 3 | 05-17-2008 06:10 PM | |
| System Error: Cat:(102) Event: 1003 - Blue Screen Error frequently. | Windows BSOD, Freezing, Restarting Help | 3 | 03-14-2008 03:12 AM | |
| Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne | Software and Utilities | 3 | 02-23-2008 12:24 PM | |
| EMachines L3607 Video Error before repairing overheating processor error | General Hardware | 0 | 12-07-2007 10:16 PM | |
All times are GMT -4. The time now is 01:13 AM.




