Hi, I've been tearing my hair out over recurring BSOD issues for the last 9 or so months. The error code I recieve is 0x0000009C (0x00000004, 0x8054d5f0, 0x82000000, 0x00070f0f) - I searched this up on Microsoft's website and learned that this is likely a hardware problem (thanks, boys) and that I could email them for further support at the low, low price of 59.95.
The BSOD only occurs after shutting down (normally or otherwise). Upon entering XP and starting up I would crash.
With that established, this is what I've done so far -
I've run multiple Diskchecks, all finding no errors.
I've run Memtest multiple times, consistently finding no errors with USB Legacy disabled (with it enabled I recieved a ridiculous amount of errors and the utility crashed after about 13 minutes).
I've system restored my computer many times - usually this would allow me to boot up normally.
My memory is running at the proper timings, there seems to be no problems with my PSU voltages. Should I post some minidumps? Thanks in advance for your help.
The BSOD only occurs after shutting down (normally or otherwise). Upon entering XP and starting up I would crash.
With that established, this is what I've done so far -
I've run multiple Diskchecks, all finding no errors.
I've run Memtest multiple times, consistently finding no errors with USB Legacy disabled (with it enabled I recieved a ridiculous amount of errors and the utility crashed after about 13 minutes).
I've system restored my computer many times - usually this would allow me to boot up normally.
My memory is running at the proper timings, there seems to be no problems with my PSU voltages. Should I post some minidumps? Thanks in advance for your help.
