flamethrower_13
Posts: 32 +0
When i start up my computer my bios does not appear... it just goes directly into windows xp startup... what can i do to get into bios.
I have an Emachine
I have an Emachine
cant get into bios
- Thread starter flamethrower_13
- Start date
Killer_Byte
Posts: 21 +0
To get into the BIOS you have to press a specific key on the keyborad as soon as you switch the pc on.
You normally get a prompt to which says "BIOS key X"
Most computers yuo can access the BIOS by pressing either
Esc
Del
F1
F10
F12
You normally get a prompt to which says "BIOS key X"
Most computers yuo can access the BIOS by pressing either
Esc
Del
F1
F10
F12
Nodsu
Posts: 5,451 +7
You man you do not see a POST screen? That is quite nomal for new computers.
You usually have to press some key to get into the BIOS setup.
Try hitting DEL or INSERT or ESC or F1 or F2 right after powering on.
At last resort, unplug the keyboard and power on the machine. You should get an error message telling you to press some key for setup.
You usually have to press some key to get into the BIOS setup.
Try hitting DEL or INSERT or ESC or F1 or F2 right after powering on.
At last resort, unplug the keyboard and power on the machine. You should get an error message telling you to press some key for setup.
Similar threads
