Now downloading...

NetGear WGT624v4 108 Mbps Wireless Firewall Router Firmware 2.0.13

WGT624v4 - Firmware Version 2. OS: Windows XP/Vista. Category: Networking.

While you download, a few facts

  • Thank you for choosing TechSpot as your download destination. If the download does not begin automatically, click here
  • This driver is available for multiple platforms/operating systems.
  • This driver has been downloaded 2,228 times so far
  • All downloaded files are on their original form. No installers, download managers or other crappy additions are allowed.

More about this driver

WGT624v4 - Firmware Version 2.0.13

* Only for WGT624v4 - Do not use on earlier versions of WGT624 (v1,v2,v3)

New Features & Fixes:

* Fixed Bug: Router does not detect conflict in Router IP address and DHCP Start/End Address.
* Fixed QoS functions like bandwidth control, application priority, priority by MAC address, and priority by physical port.
* Fixed block sites per schedule may fail to block the site if the current time is between block start time and end time and the start time is not 2 hours earlier than current time.
* Fixed the block site url is logged more than once if the url is longer than 128 characters.
* Added "WDS" feature. The WGT624v4 base station must be used with a WGT624v4 WDS repeater to work correctly, different models will not support this function.

Known Issues:

1. Setup wizard and Smart wizard detects the WAN type to be PPPoE if the WAN connects to TNCI ADSL gateway, actually it should be DHCP.
Workaround: Do not use setup wizard or smart wizard to configure WAN setting if you have TNCI ADSL gateway. Please set the WAN setting manually in the basic setting page.
2. The LAN-WAN conflict can't work under PPTP WAN connection type.
Workaround: Remove the Ethernet cable on the WAN port and change the LAN IP segment and address manually different from WAN IP segment.
3. Smart wizard web GUI redirect function doesn't work well if it detects LAN-WAN IP conflict under DHCP.
Workaround: Please refresh the browser if you use routerlogin url to open router web GUI. If not, please use,, "", "" urls to open router web GUI.
4. Router does not detect port conflict between port forwarding and port triggering.
Workaround Please change it manually, because the automatically detection doesn't work.
5. When the WGT624v4 is set to WDS repeater and it is not associated to any base station, then those wireless clients can not find this WGT624v4 repeater.
Workaround Connect the WGT624v4 repeater to base station, then the wireless client can find and associate to our repeater.

To Install:

Firmware Upgrades should be done using a wired Ethernet connection, if possible.

1. Before you upgrade write down all the settings you changed from default values, as you need to enter them MANUALLY after upgrading. Typically, people change: SSID, channel, password, and security (WEP, WPA).
2. Download to a convenient place such as your desktop.
3. Open the browser and access the router (usually the address is
4. Log in to the router (User Name = admin and Password = password unless you have changed it).
5. Click Maintenance > Router Upgrade
6. Click Browse and locate the upgrade file (download link is below).
7. Click Upload
8. Wait for the router to reboot.
9. Verify that the router firmware by checking the firmware version under Maintenance > Router Status
10. Reset router to factory defaults by clicking Maintenance > Backup Settings > Erase
11. Wait for the router to reboot.
12. Log in to the router.
13. Enter the routers settings you noted down before upgrading. We recommend running the Setup Wizard to automatically detect your broadband configuration.

First FTP for North America, second one for outside the U.S. Learn more.

Get weekly updates from TechSpot in your mailbox and never miss what's happening in the world of technology.