- Thank you for choosing TechSpot as your download destination. If the download does not begin automatically, click here
- This driver is available for multiple platforms/operating systems.
- This driver has been downloaded 1,847 times so far
- All downloaded files are on their original form. No installers, download managers or other crappy additions are allowed.
Now downloading...
NetGear WPN824EXT RangeMax WiFi Range Extender Firmware 1.1.1_1.1.9
Driver update in Networking. Operating system support: Windows XP/Vista.
New Features & Bug Fixes:
* Auto channel mode doest not select a clean channel.
* In WW version, changed default setting to "b and g" mode, auto channel.
To Install:
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
1. Download the correct file depending on your location and unzip the file to a convenient place such as your desktop.
2. Log in the router at https://192.168.1.1.
3. Click Maintenance > Router Upgrade.
4. Click Browse and locate the file you just downloaded.
5. Click Upload. While the firmware is loading, do not interrupt the upgrade process.
Do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until the extender finishes restarting! When the Test light stops blinking, wait a few seconds more before using the extender.
To check that the upgrade was successful, log in to the router again at https://192.168.1.1 and check the firmware version.
First FTP for North America users only, second one world-wide version - for users outside North America only. Learn more.
* Auto channel mode doest not select a clean channel.
* In WW version, changed default setting to "b and g" mode, auto channel.
To Install:
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
1. Download the correct file depending on your location and unzip the file to a convenient place such as your desktop.
2. Log in the router at https://192.168.1.1.
3. Click Maintenance > Router Upgrade.
4. Click Browse and locate the file you just downloaded.
5. Click Upload. While the firmware is loading, do not interrupt the upgrade process.
Do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until the extender finishes restarting! When the Test light stops blinking, wait a few seconds more before using the extender.
To check that the upgrade was successful, log in to the router again at https://192.168.1.1 and check the firmware version.
First FTP for North America users only, second one world-wide version - for users outside North America only. Learn more.