HP / Dell / etc. laptop password help thread

Status
Not open for further replies.
Hi i got a dell d420 off ebay but have the grey and white bios master screen any help would be appreciated.

code on screen 29QYXC1-595B
express service tag 4943059777

thanks in advance guys/gals
 
Hallo,
You had helped some people in my situation... hope can help me too :)

pc:HP OmniBook XE3 PIII700 14 TF 6
product code: F2306W
serial number: TW10707765
master code (press F12 at bios password request): 10222

Than'k in advance.
Marco
 
[10222] password: freezer
Hallo,
You had helped some people in my situation... hope can help me too :)

pc:HP OmniBook XE3 PIII700 14 TF 6
product code: F2306W
serial number: TW10707765
master code (press F12 at bios password request): 10222

Than'k in advance.
Marco
 
uffa14 sure got a lot of attention
Even some ol' timers came on and checked his post (Pred somethin or rather :confused:)
He is special ;) And now fixed :)
 
Good ol' predo man also took a long look just at that post today
I thought it was strange. Like uffa14 (who's been on for quite a while) was special somehow?
I wish the others were given this option as well, but sadly no :(
 
Kimsland, HPGL,

please help me, my HP omnibook 500 is locked
I can't remember my bios password. I tryed all keys I'm used
You're my only hope! please... help a french guy
my system hash code is 08886
product code F2168K
serial number TW14804119

Mitch
 
Sorry about my repeat post (previous one was over the page but I think might have been overlooked because help has been given to more recent posts already). I have a HP Compaq nx9010 and need help for unlocking system with hash 09211.

Thanks in advance.
 
Hi,

I would be eternally grateful for any help with an old Dell Latitude D610 master password recovery.

Service tag: 5S40K91-595B
Bios A06
Thanks in advance.
 
I would be eternally grateful for any help with an old Dell Latitude D610 master password recovery.

visit Link Removed
If you are able to boot from anything, use dst software.
If not, read pdf from Fastback68 and use paperclip procedure.

Password for files is smellyalater

Moderator Edit:
Here is the DSTCD.iso (Release date: 22-November-2005)
Preferred Location: http://www.savefile.com/files/2063585 No password required ;)
...
Found an excellent page here too:
http://web.archive.org/web/20031103020606/http://qasimtoep.tripod.com/dell/dell6.html
Or an excellent PDF here: http://www.savefile.com/files/2059217
 
Hi,

I need help finding BIOS master password
for an old notebook of my friend.
It's an Omnibook XE3 (with hash code: 10384).

Thank you very much indeed!

Joga
 
hi,

I tryed Unlock6 and bios_pw to generate a password for my hp omnibook 500
but it's didn't work.
Can you help me please. my hash code is 08886
this computer drive me crazy! please
 
Bios password for HP omnibook XE3

Hi,

It's me again,
I've seen that you had helped some people in my situation so I add some informations that may help (S/N and PN) :

pc:HP OmniBook XE3 GC
product code: F2117W
serial number: TW04305120
master code (press F12 at bios password request): 05528

Than'k in advance.

Sil
 
From what i've read it isn't possible to short the dell latitude d420, and i cannot boot to usb/cd/floppy dst program (when i hit f12 for the boot menu it just goes to a black screen with "invalid configuration information - please run SETUP program" then the grey/white bios screen. I am under the impression that my only possible option is to have a master password generated for it. Are there any other sites short of ebay that this is available? and is the master password the only possible route? I have already contacted dell and they will not help me because i am not the original owner and the ebay seller i purchased it from isn't either so.
 
Thanks for the links kimsland. I've read most of that prior to posting but gave those old password programs a try even though they state they don't work for 595b (which i have) and am still at the same conclusion. Are you familiar with the model i have (latitude d420)? Cause in all the shorting articles i have read it is always omitted it and then after searching around the forums here i saw several posts stating it wasn't possible to short it along with a few other models, so i assume i'm out of luck with that. I have literally looked at every chip on the board and have not found anything close to 24 C02. Is there anyway to force the one time bootmenu other than f12 to run the dst program cause f12 doesn't work for me and it just keeps booting past it? I still am under the impression that a late dell master generator is my only option do you agree? thanks again for helping out.
 
No your options are as described here :)

=> https://www.techspot.com/vb/post610782-4.html

ie Other than all the excellent options, there's also direct links to Dell and product transfer. Someone not long ago tried the contact Dell option one last time and they actually freely gave him the pass (check not too long ago posts.)

If all options in that thread do not help, then your last (and only) hope is to try 3rd party option (eBay or Google these options)
Please note do not take on any offer for payment on this free forum (if approached)
These options are overpriced to what you can get elsewhere lots cheaper
Some members (who will be banned on any notion of asking for payment) post on forums like these with their over-priced options, to desperate members. :mad:

Therefore if all other options here => https://www.techspot.com/vb/post610782-4.html
Do not help, then source other 3rd party options, away from TechSpot, as we are only free support
 
Hi
Please help me with my omnibook vt6200
Hash code 08792

About that programmer, what exactly do you mind. I got some skills on my own, maybe I could help?
 
[08792] password: ebbist
kimsland want to get program to get HP passwords like as above :)
Hi
Please help me with my omnibook vt6200
Hash code 08792

About that programmer, what exactly do you mind. I got some skills on my own, maybe I could help?
 
Have hp xe3 with hash code 10261 can any one help with bios password.

can you help i need a bios password my hash code is10261 .Thanks
 
Status
Not open for further replies.
Back