Laptop Everis model E2016 won't turn on

It sounds like your laptop is displaying a message from the BIOS (Basic Input/Output System) made by American Megatrends. This message is usually displayed when the computer first starts up and is used to perform system checks and initial setup.

It's difficult to give a definitive answer without more information about the specific message that is being displayed and the symptoms of the problem.

Possible causes of your issue could be a hardware failure, a problem with the BIOS settings, or an issue with the power supply.

You may try the following:

  • Make sure the laptop is plugged in and the battery is charged
  • Try removing the battery and unplugging the laptop, then holding down the power button for 30 seconds and then release
  • Try doing a hard reset by unplugging the laptop, remove the battery and hold down the power button for 30 seconds
  • Try booting the laptop in safe mode by pressing the F8 key during startup
If none of these steps worked, it's likely that you have a hardware failure and it's best to take it to a professional.
 
It sounds like your laptop is displaying a message from the BIOS (Basic Input/Output System) made by American Megatrends. This message is usually displayed when the computer first starts up and is used to perform system checks and initial setup.

It's difficult to give a definitive answer without more information about the specific message that is being displayed and the symptoms of the problem.

Possible causes of your issue could be a hardware failure, a problem with the BIOS settings, or an issue with the power supply.

You may try the following:

  • Make sure the laptop is plugged in and the battery is charged
  • Try removing the battery and unplugging the laptop, then holding down the power button for 30 seconds and then release
  • Try doing a hard reset by unplugging the laptop, remove the battery and hold down the power button for 30 seconds
  • Try booting the laptop in safe mode by pressing the F8 key during startup
If none of these steps worked, it's likely that you have a hardware failure and it's best to take it to a professional.
Thanks very much for this information
 
Back