Any advice here would be much appreciated. My Emachines T1840 power supply failed. I replaced it with a Bestec 250W power supply (same part as the one that failed). The machine is getting power, but does not boot. The LEDs are on, but are flashing very rapidly. I have checked connections on motherboard, all appear okay. I did not replace the CPU fan. Now I'm wondering whether or not this is the problem...Please help! Thank you!
Here are system specs:
CPU Fan Type: CPU Fan, H/SINK:3713S,845G CHIP,W/PUSH PIN 2093
Power Supply: PS 250 WATT 1670
CPU: CPU , Celeron 1.8 GHz CPEMINCL2100
MB: MB, Imperial 2095
Memory: RAM DDR-RAM (128MBX1) (Max. 2GB) 1923
Video: Video, integrated
Prim CD Model: CDRW, SW-240B/TG9(R400) 2434
Secondary CD: DVD ROM SD-616T/TG9 2510
HDD: HDD 40 GB 1360
FDD Model: FDD, SFD-321B/LTGNQ FDEM2097BLCK
Here are system specs:
CPU Fan Type: CPU Fan, H/SINK:3713S,845G CHIP,W/PUSH PIN 2093
Power Supply: PS 250 WATT 1670
CPU: CPU , Celeron 1.8 GHz CPEMINCL2100
MB: MB, Imperial 2095
Memory: RAM DDR-RAM (128MBX1) (Max. 2GB) 1923
Video: Video, integrated
Prim CD Model: CDRW, SW-240B/TG9(R400) 2434
Secondary CD: DVD ROM SD-616T/TG9 2510
HDD: HDD 40 GB 1360
FDD Model: FDD, SFD-321B/LTGNQ FDEM2097BLCK