Hi All,
I have an PC having AMD Athelon XP 2100+(1733MHz), 512DDR SDRAM and MS 6382E VER:3 Motherboard. A few days ago, old processor (athelon xp 2000+ 1667MHz) stopped working so i bought the new one as above. After installing it was showing the speed of 1300MHz(1500+) as motherboard was set at 100Mhz FSB. After changing jumper setting to 133mhz its showing the right speed but doesn't allow to install XP professional. It hangs while copying files or gives an error message 'page fault in nonpaged area' during installation when askfor the option to set up windows in a drive. At 100mhz fsb, we can install xp succesfully and works fine but computer freezes if changed to 133fsb afterwards.

Unless you have a more recent (V3) manual suggesting otherwise.
I think you are pushing your board past its limits...
The specs on your board say...

Set everything to default (no overclocking). Install XP and then fiddle around with OC

Thank you very much for replying...

I don't ve mainboard manual so didn't know the maximum speed it support.
Thanx again.

See if the manual listed linked on this page is the right one for your board...
http://www.elhvb.com/mboards/OEM/medion/index.html
or here http://www.elhvb.com/mobokive/Archiv...382/index.html

Hint: Search/Look on the page for 6382, not 6382E.

If not, then you might try requesting one here... http://www.mainboard.cz/driver/msi.htm

You might also like to look at this site...
http://www.d-a-l.com/help/general-ha...re-things.html