1. TechSpot is dedicated to computer enthusiasts and power users. Ask a question and give support. Join the community here.
    TechSpot is dedicated to computer enthusiasts and power users.
    Ask a question and give support.
    Join the community here, it only takes a minute.
    Dismiss Notice

Can you please help me?

By BlackCitadel
Aug 4, 2010
Post New Reply
  1. Hello,
    First i will give you my system information, and tell me is my motherboard capable and combatible with a 512MB ATI RADEON HD 4350 Graphics Card.
    Processor: Intel Celeron D 347 3066 MHz
    CPU Clock: 3066.0 MHz (23.0 x 133.3 Mhz QDR)
    Level 1 Cache: 16kB+12k uOp (data+instr.)
    Level 2 Cache: 512 kB
    System Name: ECS 662/1066T -M2
    Motherboard Vendor: Intel Corporation
    Board Model: ECS 662/1066T -M2
    BIOS Version: AMI BIOS 080013 for Intel
    Chipset Name: SiS 662
    Chipset Vendor: Silicon Integrated Systems (SiS)
    Chpset: CPU to PCI Bridge
    Southbridge Vendor: Silicon Integrated Systems (SiS)
    Southbridge: PCI to ISA Bridge
    DMI/SMBIOS Version: 2.3
    Memory Size: 2096440 kB (2047.30 MB) (Note: First it was 1GB)
    System Memory: 2048 MB
    Memory Module: 1024 MB
    Memory Module: 1024 MB
    Floppy Drive: Floppy 1.44 MB (3.5")
    HDD Model: ST3500418AS
    HDD Size: 476940 MB (465.76 GB) ( First i had a 80GB Hard Drive before i put the SATA 465GB one)
    CD/DVD Model: Compaq DVD-ROM DVD-117
    CD-DVD Speed: 40x
    Monitor Vendor: BenQ
    Monitor Model: BenQ T720 (BNQ 7693)
    Video Chip Vendor: ATI Technologies Inc
    Video Chip: RV710 (RADEON HD 4350)
    Video Memory Size: 512 MB
    Sound Chip Vendor: Silicon Integrated Systems (SiS)
    Sound Chip: SiS7012 Audio Codec
    (Operating System)
    Operating System: MS Windows 7 Ultimate (6.1.7600)
    Windows Folder: C:\Windows
    Modem Vendor: Conexant Systems
    Modem Model: HSF 56k HSFi Churchill Data/Fax Modem
    Interface Description: Dial-up Connection
    Adapter Vendor: Silicon Integrated Systems (SiS)
    Adapter Name: SiS900 10/100 Etherner Adapter
    LPT Ports: LPT(0378h)
    COM Ports: COM1(03F8h)

    Am getting Blue screens, the sure thing that a blue screen should come after i turn on my computer, for example if i shut down my computer for 5 hours when then i turn it on i face a Blue screen probably after 45Minutes-1-2-3 Hours every time i get a different error. First my computer was a 64MB Internal SiS Mirage graphics card and i rarely faced bluee screens, one blue screen may come every 2 weeks. But now i changed my card to nVIDIA N8400GS and i got nviddmkm.sys Error Blue screen every time i turn on the computer, i decided to change it and changed it to ATI RADEON HD 4350 512MB After that first i got a blue screen showing USBPORT.sys they told me it's a USB driver issue so i removed my USB Keyboard and put a PS-2 Keyboard, i downloaded the latest ATI HD 4350 Display drivers and installed it, and while am running an online game it's called "Conquer Online" and running Windows Media Player 11 not doing anything else then after about 40 minutes i got a blue screen:
    A problem has been detected and windows has been shut down to prevent damage to your computer.

    if this is the first time you've seen this stop error screen, restart your computer, if this screen appears again, follow these steps:
    Check to make sure any new hardware or software is properly installed. if this is a new installation ask your hardware software manufacturer for any windows updates you might need.
    If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode.
    Technical information
    ***STOP: 0X00000050(0XDDA49BD3,0X00000000,0X89B811B0,0X00000002)
    *** Watchdog.sys- Address 89B811B0 base at 89B80000, DateStamp 4a5bc21a
    Collecting data for crash dump...
    initializing disk for crash dump...
    beginning dump of physical memory.
    Dumping physical memory to disk: 100
    physical memory dump complete.
    Contact your system admin or technical support group for further assistance.

    Is this a graphics drivers issue or whatever drivers are not just graphic or is it my computer's issue.

    Any help please.


Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...