More Ati Radeon 9600tx Problems

Status
Not open for further replies.
------------------
System Information
------------------
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: Time Computers
System Model: MS-6712
BIOS: Version 07.00T
Processor: AMD Athlon(tm) , MMX, 3DNow, ~1.3GHz
Memory: 512MB RAM
Page File: 350MB used, 900MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 XT AGP (0x4152)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4152&SUBSYS_7C19174B&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Default Monitor
Monitor Max Res:
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6490 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/26/2004 20:35:58, 214528 bytes
-------------
Sound Devices
-------------
Description: SB Audigy Audio [E800]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_00511102&REV_03
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: e10kx2k.sys
Driver Version: 5.12.0001.0136 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/5/2001 13:02:30, 1758336 bytes

Hi,
just went and bought the Radeon 9600TX for my computer. Did all the usual stuff. Uninstalling current drivers etc before installing the new card.

Downloaded the latest drivers and system control from ATI.

I get the following error message when opening the system control "the currently used open gl driver does not support the required extensions to run the 3d preview".

Also when trying to load Doom3 i get the following error message " The current video card / driver combination does not support the necessary features".

I cant for the life of me figure whats up. :hotbounce
 
Are you using the drivers that came with the video card? They are usually out of date. Go to ATI's site and get the latest Catalyst 4.11 drivers.
 
Status
Not open for further replies.
Back