VIA IDE Miniport Driver (Windows 95/98/Me/NT/2000/XP) 3.0.14

From the developer: "The VIA IDE Miniport driver does not install with the VIA 4in1 drivers. It should only be installed on systems with a VIA chipset and: IDE Zip drive, under all Microsoft operating systems, with a 686b southbridge chip; ATA100 hard drives with Windows 2000 prior to Service pack 1; ATA133 hard drives under Windows 2000 and Windows XP; IDE Zip drives under Win2K - install the driver and then set the Zip-Drive to DMA disabled and PIO-Mode 1 in BIOS. Open the IDE Tool provided with Bus master Driver and set the Zip-Drive to PIO-Mode 3."

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.