CPC2004 or anyone who can read minidumps

By blooz4u ยท 4 replies
Oct 7, 2005
  1. Hi there!!

    This is my first post, mainly because I didn't know what minidumps were or where they were located until earlier tonite.

    I have attached quite a few minidumps. Mine seem to occur mainly when trying to run any 3d applications or games. Below is a brief summary of my computer.

    Any help would be greatly appreciated!!

    Thanks so much!


    Model : Intel(R) Pentium(R) 4 CPU 3.00GHz
    Speed : 3.02GHz
    Performance Rating : PR4010 (estimated)
    Cores per Processor : 1 Unit(s)
    Threads per Core : 2 Unit(s)
    Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line size
    L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector

    Bus(es) : AGP PCI IMB USB FireWire/1394 i2c/SMBus
    MP Support : 1 Processor(s)
    MP APIC : Yes
    System BIOS : Phoenix Technologies, LTD 6.00 PG
    Mainboard : http://www.abit.com.tw/ VT7 (VIA PT880-8237)
    Total Memory : 1GB DDR-SDRAM

    Chipset 1
    Model : Abit Computer Corp PT880 CPU to PCI Bridge
    Front Side Bus Speed : 4x 201MHz (804MHz data rate)
    Total Memory : 1GB DDR-SDRAM
    Memory Bus Speed : 2x 201MHz (402MHz data rate)

    Video System
    Monitor/Panel : Dell 2005FPW (Digital)
    Adapter : RADEON 9600 SERIES
    Adapter : RADEON 9600 SERIES - Secondary
    Imaging Device : Brother MFC-3340CN USB

    Physical Storage Devices
    Removable Drive : Floppy disk drive
    Hard Disk : Maxtor 6Y160P0 (153GB)
    Hard Disk : Brother MFC-3340CN USB Device
    CD-ROM/DVD : _NEC DVD_RW ND-2500A (CD 40X Rd, 32X Wr) (DVD 5X Rd, 4X Wr)

    Logical Storage Devices
    1.44MB 3.5" (A:) : N/A
    Hard Disk (C:) : 153GB (137GB, 90% Free Space) (NTFS)
    Sb_install (D:) : 566MB (CDFS)
    Removable Drive (E:) : N/A

    Serial/Parallel Port(s) : 2 COM / 1 LPT
    USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
    USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
    USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
    USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
    USB Controller/Hub : VIA USB Enhanced Host Controller
    USB Controller/Hub : USB Root Hub
    USB Controller/Hub : USB Root Hub
    USB Controller/Hub : USB Root Hub
    USB Controller/Hub : USB Root Hub
    USB Controller/Hub : USB Root Hub
    USB Controller/Hub : USB Composite Device
    USB Controller/Hub : USB Composite Device
    USB Controller/Hub : USB Printing Support
    USB Controller/Hub : USB Mass Storage Device
    FireWire/1394 Controller/Hub : OHCI Compliant IEEE 1394 Host Controller
    Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    Mouse : PS/2 Compatible Mouse
    Human Interface : HID-compliant consumer control device
    Human Interface : USB Human Interface Device

    MultiMedia Device(s)
    Device : Creative SB Audigy 2 ZS (WDM)
    Device : Creative Game Port

    Operating System(s)
    Windows System : Microsoft Windows XP/2002 Home (Win32 x86) 5.01.2600 (Service Pack 2)

    Network Services
    Adapter : VIA Compatable Fast Ethernet Adapter

    Attached Files:

  2. cpc2004

    cpc2004 TS Evangelist Posts: 1,994

    Hi blooz4u,

    The culprit is faulty ram. I find memory corruption at one of your minidumps.
    You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty can pass memtest.

    1. Check the temperature of the CPU and make sure that it is not overheat (ie temperatur < 60C)
    2. Reseat the memory stick to another memory slot
    3. Downclock the ram
    4. Clean the dust inside the computer case
    5. Make sure that the ram is compatible to the motherboard

    If it still crashes, diagnostic which memory stick is faulty
    1. Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
    2. If you have only one memory stick, replace the ram

    Debug report of one of your minidumps.

    BugCheck 1000008E, {c0000005, 8056bbab, a89ccac8, 0}
    Probably caused by : memory_corruption
    Followup: memory_corruption
    a89ccb80 8056bd25 dff9c001 0113fedc a89ccc04 nt!ObpCaptureObjectName+0x1b
    a89ccbd4 8056f222 00000000 dff9c001 dff9c001 nt!ObpCaptureObjectCreateInformation+0x135
    a89ccc18 8057d2d3 0113fe9c 00000000 dff9c001 nt!ObOpenObjectByName+0x62
    a89ccc94 8057d3a2 0113fefc c0100080 0113fe9c nt!IopCreateFile+0x407
    a89cccf0 8057d3e5 0113fefc c0100080 0113fe9c nt!IoCreateFile+0x8e
    a89ccd30 804dd99f 0113fefc c0100080 0113fe9c nt!NtCreateFile+0x30
    a89ccd30 7c90eb94 0113fefc c0100080 0113fe9c nt!KiFastCallEntry+0xfc
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    0113fef4 00000000 00000000 00000000 00000000 0x7c90eb94

    CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
    8056bbac - nt!ObpCaptureObjectName+1c
    [ 55:01 ]
    1 error : !nt (8056bbac)

    MODULE_NAME: memory_corruption
    IMAGE_NAME: memory_corruption
    FOLLOWUP_NAME: memory_corruption
    STACK_COMMAND: .trap ffffffffa89ccac8 ; kb

    Followup: memory_corruption
  3. blooz4u

    blooz4u TS Rookie Topic Starter


    Hi there and thanks for the quick look and reply!!

    I did have a ram problem earlier in the year. I have since replaced both sticks with 2x512 and did not get any failed test messages from memtest.

    I'll try tonight to move the sticks to other slots on the board.

    Might you have any other suggestions??


  4. cpc2004

    cpc2004 TS Evangelist Posts: 1,994

    My previous post mentioned that some faulty ram can pass memtest.
  5. garza-l2007

    garza-l2007 TS Rookie

    BOSD help!

    Hello. This is my frst post on this board. I'm having major probs with my system. The computer gave me the BOSD the last several times I've tried to shut it down (it restarts instead of shutting down). I'm attaching the Minidumps that were created by Wondows. Any and all help help will be appreciated! Thanks in advance!
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...