TechSpot - PC Technology News and Analysis

DO NOT upgrade firmware on any TRENDnet product using wireless connection.

Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only.

What's New:

1. Fixed user define services type from 18 entries to 30 entries.
2. Added DPD (Dead Peer Detection) function

Firmware Upgrade Instructions:

Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.

Warning!

Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware Upgrade requires resetting the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not restore the previously saved Router "configuration file" to the new firmware. We apologize for the inconvenience.

If you need assistance performing the firmware upgrade or if you have any questions, please contact Techsupport Team http://www.trendnet.com/support.

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers or stop by our frontpage for the best daily PC technology news coverage on the web.