Intel Rapid Storage Technology 10.6.0.1022 for Windows 32-bit

This driver supports RAID 5 & 10 on specific desktop platforms; supports RAID 0, 1, AHCI & Matrix RAID on specific desktop and mobile platforms. The driver should be installed after the operating system has been installed. F6 and RAID BIOS configurations need to be performed prior to installation of this driver for proper operation.

Intel® RAID Technology requires the Intel® ICH9R/ICH9M-E/ICH10R/PCH-PCH-M SATA RAID controller hub, Intel® 82801HR I/O controller hub (ICH8R), Intel® 631xESB/632xESB I/O controller hub, Intel® 82801GR/GH I/O controller hub (ICH7R/DH), Intel® 82801FR I/O controller hub (ICH6R).

This driver provides support for the following:

• High-capacity & fault-tolerant SATA RAID 5 arrays and high-performance & fault-tolerant SATA RAID 10 arrays on select Intel® 5 Series, 4 Series, 3 Series, 965, 975X, 955X and 945 chipset-based platforms.
• High-performance SATA RAID 0 arrays & redundant SATA RAID 1 arrays on select Intel® 5 Series, 4 Series, 3 Series, 965, 975X, 955X, 945, 925, 915 chipset-based platforms.
• AHCI support on select Intel® 5 Series, 4 Series, 3 Series, 965, 975X, 955X, 945, 925 and 915 chipset-based platforms, as well as on Mobile Intel® 915/910 chipset-based platforms.

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.