Modify low power /idle/ memory clock on Rx 570?

[bobalazs]

I'm trying to increase the default idle 300 Mhz memory clock of rx 570 with MSI AB. as it often causes graphical glitches. I edited voltage curve with control-F but I dont see any option to modify idle memory clocks, only the 3d clocks.
Any tips on how to go about that?

 

[bobalazs]

Well I found a half-solution. I went to wattman settings and under global wattman-memory - STATE 0 Min STATE 1 STATE 2 Max
I clicked STATE 1 and "set as minimum state"
So that means I don't idle to 300 Mhz, but no graphics glitches at all no matter what I do. Power consumption however increased by about 7 watts (pulled from wall)