Page_fault_in_nonpaged_area

Status
Not open for further replies.
I everyone.

I'm desperate! I've even formated the pc but still got the same problem.

This is the situation. A couple weeks I've receive the following message:" To prevent damage your computer (bla,bla...) PAGE_FAULT_IN_NONPAGED_AREA (...)".

It doenst say any file or program, NOTHING, unless that message. After installing Windows (without formating), I didn't have any problem, until I make an update or any driver, because it must be some thing but I don't know what.

I have log on in the windows that I don't have the problem and I received this:" BCCode : 10000050 BCP1 : CBFC0000 BCP2 : 00000000 BCP3 : 804D9DA8
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1 "

If you know how to help, please do it!


1024Mb DDR Ram
AMD Athlon 1.35Ghz
ASUS Radeon 9600 XT
 
Hi,

It is memory problem. It maybe caused by hardware or device driver error. The crashes occurs at logonui. Maybe your windows is infected with virus. Run virus scan and make sure your windows does not infected with virus, spyware and adware.


PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: cc640000, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 804d9da8, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name
READ_ADDRESS: cc640000

FAULTING_IP:
nt!memmove+33
804d9da8 f3a5 rep movsd

MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 4
DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT
BUGCHECK_STR: 0x50
LAST_CONTROL_TRANSFER: from 8060f218 to 804d9da8

STACK_TEXT:
ee9e7ab0 8060f218 cc60a678 cc60a67c fffffffc nt!memmove+0x33
ee9e7adc 805a8c03 e2491b60 cc60a678 80000038 nt!CmpCheckValueList+0x278
ee9e7b08 805a8ce1 00089590 00000001 00088918 nt!CmpCheckKey+0x2c0
ee9e7b34 805a9874 e2491b60 00000001 00000020 nt!CmpCheckRegistry2+0x7c
ee9e7b5c 805a91b1 e2491b60 00000001 ee9e7c60 nt!CmCheckRegistry+0x78
ee9e7b9c 805aa3f1 ee9e7bd8 00000005 00000000 nt!CmpInitializeHive+0x2c2
ee9e7bf4 805aad2c ee9e7d00 00000000 ee9e7c60 nt!CmpInitHiveFromFile+0xa3
ee9e7c1c 805aae02 ee9e7cc8 ee9e7c68 ee9e7c58 nt!CmpCmdHiveOpen+0x21
ee9e7ca8 805aaca2 ee9e7ce0 ee9e7cc8 00000000 nt!CmLoadKey+0x8c
ee9e7d40 805aad02 0007f5ec 0007f5d4 00000000 nt!NtLoadKey2+0x225
ee9e7d54 804de7ec 0007f5ec 0007f5d4 0007f618 nt!NtLoadKey+0x12
ee9e7d54 7c90eb94 0007f5ec 0007f5d4 0007f618 nt!KiFastCallEntry+0xf8
WARNING: Frame IP not in any known module. Following frames may be wrong.
0007f618 00000000 00000000 00000000 00000000 0x7c90eb94

FOLLOWUP_IP:
nt!CmpCheckValueList+278
8060f218 8b4724 mov eax,[edi+0x24]

SYMBOL_STACK_INDEX: 1
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: nt!CmpCheckValueList+278
MODULE_NAME: nt
IMAGE_NAME: ntoskrnl.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 42250ff9
STACK_COMMAND: kb
FAILURE_BUCKET_ID: 0x50_nt!CmpCheckValueList+278
BUCKET_ID: 0x50_nt!CmpCheckValueList+278

Suggestion
1. Check the temperature of the CPU and make sure that it is not overheat (ie temperature < 60C)
2. Reseat the memory stick to another memory slot
3. Downclock the ram
4. Clean the dust inside the computer case
5. Make sure that the ram is compatible to the motherboard
6. Downclock the CPU
7. Attach the hijackthis log here

If it still crashes, diagnostic which memory stick is faulty
Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
 
Status
Not open for further replies.
Back