In context: In many ways, a bioprinter is simply a 3D printer that extrudes gels containing living cells instead of molten plastic. Commercial models can easily cost more than $100,000, however, prompting some labs to convert inexpensive hobbyist 3D printers into bioprinters themselves. But because the soft gel tends to sag before it solidifies, most of these DIY machines have been limited to printing fewer than 20 layers.
Now, a team from the University of Rochester and Cornell University has built one capable of stacking around 100 layers, all for about $450. In a study published in ACS Applied Polymer Materials, the researchers describe how they started with a standard Creality Ender 3 and replaced its print head with a syringe pump held together by 3D-printed PETG components.
The pump doesn't just push ink out, either. It can also pull it back between movements, much like the retraction setting Ender owners adjust to prevent stringing. Fine-tuning these movements reduced stray bacterial deposits by nearly 100-fold. As a result, the setup can print what lead researcher Anne Meyer describes as "crisp shapes with well-defined edges."
The extra height, however, comes from where the ink is deposited. Rather than printing on a bare build plate, the nozzle operates inside a slurry made of tiny gelatin or agarose particles mixed with calcium chloride. The bath supports each layer as it is printed, while the calcium quickly sets the alginate-based ink. It's essentially the same technique used by Carnegie Mellon's FRESH method to print human liver tissue.

In the team's preprint, a 100-layer structure measured just under 22 mm tall, roughly the width of a US nickel. Even so, that's enough height to print hollow cylinders and lattice structures. Meyer notes that hollow shapes expose more surface area to the bacteria inside, allowing them to absorb nutrients and release metabolic byproducts more efficiently.
A gelatin-based version of the slurry allows researchers to remove a finished print directly from the bath. The agarose version, meanwhile, is designed to remain in place and serve as an incubator. Previously, printed bacteria began dying off after about nine days. In the agarose bath, with nutrients mixed in, the team's E. coli remained alive for four weeks.
For more than a decade, Meyer's lab has been developing its own bioprinters to create living test structures for research into antibacterial applications and wastewater treatment. She says the longer incubation period could allow researchers to produce engineered biofilms – slimy bacterial colonies that cling to surfaces – that more closely resemble those found in medically relevant environments. Depending on the bacteria they contain, printed materials like these could also help clean contaminated water or break down plastic.
The team has also posted the STL files and G-code on GitHub. Since the system is built around a standard Ender 3, many labs and hobbyists may already own most of the necessary hardware.