Linksys BEFSR41 EtherFast Cable/DSL Router with 4-Port Switch Firmware 2.00.4

Date: October 7, 2009
File Size: 395 KB
OS Support: Windows XP/Vista
Downloads: 580

Alternate mirrors

Report a bad link

Release notes:

This is the latest firmware for the BEFSR41 EtherFast Cable/DSL Router with 4-Port Switch version 4.2

What's New:

1. Fixed an issue with PPTP mode configuration with the Setup wizard.
2. Fixed UPnP test failed.
3. Fixed RIP not updating the router table.
4. Fixed Dynamic Route not working properly
5. Fixed static Router configuration failure
6. Fixed maximum static route.
7. Fixed where client can't get IP after adding a static route.
8. Fixed UPnP link speed/duration and send/receive packet status in the Internet Gateway.
9. Fixed clne PC's MAC address is accessable remotely.
10. Fixed QoS application based accepting invalid entry.
11. Fixed IGMPv2 client leave silently after 100 seconds.

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.

TechSpot on:

Subscribe to TechSpot

Receive a weekly update of our best features and tech news you don't want to miss: