ATI Radeon HD 5450, no signal (DVI)

[Infamous72]

I've recently bought an ATI Radeon HD5450 however when everything is plugged in Í can't get a signal on DVI only on Analog. I am sure there is no problem with the cable, not only have I tried another DVI cable but my old video card does get a signal (DVI) with everything plugged in the exact same way.

If computer specs are needed:

MS Windows XP Home 32-bit SP3
Processor
Intel Core 2 Duo E7300 @ 2.66GHz 38 °C
Wolfdale 45nm Technologie
RAM
2,00 GB Single-Kanaal DDR2 @ 400MHz (6-6-6-18)
Moederbord
Foxconn G31MV/G31MV-K (Socket 775) 40 °C
Graphics
PLE2607WS (1920x1200@60Hz)
1024MBGeForce 9500 GT (Point of View) 91 °C
Harde schijven
244GB Hitachi Hitachi HDP725025GLA380 (SATA) 32 °C
Optische schijven
TSSTcorp CDDVDW SH-S223F
JGDW XIBS1Q38DI SCSI CdRom Device

 

[LinkedKube]

I had a similar problem, card wasn't brand new when the problem occured but happened after owning it for a few years. Found out the card was dead. Not sure if an rma would fix your issue.

 

[Infamous72]

Thanks for the reply, could you explain me what an RMA is.
The card is brand new so the card being dead sounds a bit odd

 

[LinkedKube]

rma is when a person returns their item because its defective. There should be a form you can get from w/e you bought it from. Contact the customer support from where you purchased the card.

 

[Infamous72]

Thanks for the help