Random pc restarts and Bsod
- Thread starter Nzay
- Start date
- Status
Route44
Posts: 12,015 +82
Your symptoms coupled with 4 different error codes with 4 of 5 dumps citing hardware as the issue, plus one of the errors being 0x19 which are usually caused by failing, corrupted or mismatched memory calls for running Memtest on your memory.
See the link below and follow the instructions. There is a newer version than what is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.
Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.
There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.
If you have errors you have corrupted memory and it needs to be replaced.
Step 2 – Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.
Link: https://www.techspot.com/vb/topic62524.html
* Get back to us with the results.
See the link below and follow the instructions. There is a newer version than what is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.
Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.
There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.
If you have errors you have corrupted memory and it needs to be replaced.
Step 2 – Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.
Link: https://www.techspot.com/vb/topic62524.html
* Get back to us with the results.
- Status
