What's New:

1.Update cpu code from AGESA 3.1.9.0 to AGESA 3.3.2.0.
2.To settle the problem of screen tearing resulted from enabling side port when CPU is over-clocked

Notice:

(1.) After you flash the BIOS, to load Optimized Defaults or clear CMOS is a MUST to ensure the system works properly.
(2.) BIOS Upgrade Step: Flash BIOS ⇒ Enter into BIOS ⇒ Load Optimized Defaults ⇒ Save and Exit
(3.) Please make sure that you are using the AWARD Flash Utility Ver. 8.83 before upgrading your BIOS.
(4.) Some motherboards incorporate SPI BIOS may cause the system crash by updating with the former version of AWARD Flash Utility!
(5.) when using AWDFLASH(we recommend version newer than V8.83)to renew the BIOS of this version"/cd/cp/ch/wb/qi"parameters are required.
(6.) Please let the folowing motherboard series use the updated tool Award Flash 8.27B.
(P4XFA P4XFB P4XFBU P4XFCP P4XFCU P4XFM P4XFMP P4XFMU V6DP V6DU V6FP V6FU)

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.