TechSpot - PC Technology News and Analysis

Notice:

(1.) After you flash the BIOS, to load Optimized Defaults or clear CMOS is a MUST to ensure the system works properly.
(2.) BIOS Upgrade Step: Flash BIOS ⇒ Enter into BIOS ⇒ Load Optimized Defaults ⇒ Save and Exit
(3.) Please make sure that you are using the AWARD Flash Utility or AMI Flash Utility.
(4.) Please make sure that you are using the AWARD Flash Utility Ver. 8.83 before upgrading your BIOS;Please make sure that you are using the AMI Flash Utility Ver. 4.29 before upgrading your BIOS.
(5.) when using AWDFLASH(we recommend version newer than V8.83)to renew the BIOS of this version"/cd/cp/ch/wb/qi"parameters are required;when using AMIFLASH(we recommend version newer than V4.29)to renew the BIOS of this version"/p /b/n /c /k"parameters are required.
(6.) Neither the motherboard with the AWARD BIOS can be updated by the AMI BIOS nor the motherboard with the AMI BIOS can be updated by the AWARD BIOS.A02 version is to update A01 BIOS version while MA02 to update MA01.

What's New:

- Updates PXE ROM to V2.28 to support Realtek 8111D

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers or stop by our frontpage for the best daily PC technology news coverage on the web.