ASRock 970 Extreme4 Bios 2.10
- ASRock Dura Cap (2.5 x longer life time), 100% Japan-made high-quality Conductive Polymer Capacitors
- Digi Power, Supports AM3+ Processor, 8-Core CPU
- Supports Dual Channel DDR3 2100(OC)
- Supports AMD Quad CrossFireX™, 3-Way CrossFireX™ and CrossFireX™
- Supports NVIDIA® SLI™
- 4 x USB 3.0, 5 x SATA3, 2 x IEEE 1394, Dr. Debug, Power/Reset/Clear CMOS Switch with LED
- 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec), Supports THX TruStudio™
- Supports ASRock XFast RAM, XFast LAN, XFast USB Technologies
- Supports Graphical UEFI, On/Off Play, Instant Boot, Instant Flash, APP Charger, Turbo UCC
- Free Bundle : CyberLink MediaEspresso 6.5 Trial
- Support Windows 8
Updating BIOS Procedures:
- Download the BIOS package (WinZip format with .zip file extension). And close all programs.
- Unzip and save all files to the same directory of any storage location accessible by the host system. And you should see BIOSfilename.EXE, UCORESYS.SYS, UCOREVXD and UCOREW64.SYS.
- Click BIOSfilename.exe
- It shows a dialog icon to remind you to close other programs. Click "OK".
- After finishing upgrading the BIOS, it shows "Press Any key". Please press any key.
- Then it shows a dialog icon to remind you to restart the system. Click "Yes".
- After system restart, press <F2> to enter the BIOS setup utility during boot up. In Exit menu, please select "Load Default Settings" and press <Enter> to continue.
- Select "Exit Saving Changes" and press <Enter> to exit the BIOS setup utility.
- Now, system is booting up with new BIOS.
How do I check the BIOS version?
- The BIOS version can be found during system boot up.
- The BIOS version can be found in BIOS setup utility.
Update BIOS under Windows® Vista™ / Windows® 7:
- Step 1: Please right click BIOSfilename.exe
- Step 2: Click "Run as administrator".
Notice: If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.
Downloads and Drivers
Subscribe to TechSpot
Receive a weekly update of our best features and tech news you don't want to miss: