Videologic
Sirocco Crossfire review
Posted by Julio
Franco on October 03, 2000 - Page 2/5
Company: Imagination
Tech/Videologic Product:
Sirocco
Crossfire 4.1 speaker system
System Specs
SUBWOOFER
- MDF
cabinet, containing magnetically shielded bass drive unit.
- Low
frequency drive unit: Audax 6.5" cone.
SATELLITES
- Mid-frequency
(bass/mid) drive unit and separate high-frequency drive
unit (tweeter), both fully shielded.
- Bass/mid
frequency drive unit: Audax 3" cone.
- High
frequency drive unit: Audax 10mm polymer dome.
AMPLIFIER
- Self
Peak Instantaneous Temperature (°Ke) (SPiKe™)
Protection Circuitry for protection against overvoltage,
undervoltage, overloads, including shorts to the supplies,
thermal runaway and instantaneous temperature peaks.
- Power
supply unit: Dual rail toroidal transformer with 28000µF
of smoothing capacitance.
Power
output: Satellites: 4 x 10W RMS.
Subwoofer:
40W RMS. Full system (all channels driven): 80 Watts RMS at 1%
THD; 100 Watts RMS at 10% THD.
Frequency
response: < 3Hz to > 100KHz.
THD
(nominal output): Less than 0.01% at 1KHz.
Input
sensitivity: 200mV RMS for inputs 1 and 3; 1.5V RMS for
input 2.
Controls:
Power on/off, Volume, Subwoofer volume (relative to main
volume), Front/Rear fade, Source switch, Quad switch (for
stereo surround).
Connectors:
Gold plated phono inputs for surround source, stereo source,
and Dolby Digital LFE channel; 3.5mm jack for second stereo
source; individual outputs to each speaker unit; 3.5mm
headphone jack on amplifier front panel; IEC mains inlet.
Power
supply: 220-240V AC 50Hz.
Go
to next page !
|
