BCCode problem

[lilou]

Hi,

My system has a 3500+ AMD Athlon 64 processor with a clockspeed of 2.21 Ghz and 3 GB RAM. The system runs on XP home edition.

Lately my system stops with no reason, shows for a second a blue screen, starts again and gives a system error:
BCCode: 1000000a
BCP1: 8c4b2008
BCP2: 00000002
BCP3: 00000001
BCP4: 8051F78F
OSVer: 5_1_2600
SP: 3_0
Product: 768_1

I attached the minidumps(3) and I checked the eventlog and below are 3 events on a system error that occured in a short timeframe:

System error:
Errorcode; 1000000a,
parameter1: 8c466008
parameter2: 00000002
parameter3: 00000001
parameter4: 8051f78f

bytes:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 63 eters 8c
0030: 34 36 36 30 30 38 2c 20 466008,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 38 30 35 31 01, 8051
0050: 66 37 38 66 f78f

words:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303120 30303030
0020: 50202061 6d617261 72657465 63382073
0030: 30363634 202c3830 30303030 32303030
0040: 3030202c 30303030 202c3130 31353038
0050: 66383766

System error:
Foutcode; 1000000a
parameter1: 8c52f008
parameter2: 00000002
parameter3: 00000001
parameter4: 8051f78f

bytes:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 63 eters 8c
0030: 35 32 66 30 30 38 2c 20 52f008,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 38 30 35 31 01, 8051
0050: 66 37 38 66 f78f

words:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303120 30303030
0020: 50202061 6d617261 72657465 63382073
0030: 30663235 202c3830 30303030 32303030
0040: 3030202c 30303030 202c3130 31353038
0050: 66383766

system error:
Foutcode; 1000000a,
parameter1: 8c27b008
parameter2: 00000002
parameter3: 00000001
parameter4: 8051f78f.

bytes:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 63 eters 8c
0030: 32 37 62 30 30 38 2c 20 27b008,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 38 30 35 31 01, 8051
0050: 66 37 38 66 f78f

words:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303120 30303030
0020: 50202061 6d617261 72657465 63382073
0030: 30623732 202c3830 30303030 32303030
0040: 3030202c 30303030 202c3130 31353038
0050: 66383766

I did also a MemTest86+ V4.10 and the results after 3 passes was:
TST: 6 (moving inversions, 32 bit pattern)
Failing address: 0003ce2f270 - 974.1 Mb
Failing address: 00031e57cb0 - 798.3 Mb
Failing address: 0003ce2f270 - 974.1 Mb
and then I stopped the test.

Can anybody help me to detect what this error means?

 

[Route44]

Any errors while doing memtest tells us you have corrupted memory. Run the test again per stick to dtermine which ones or if all are bad. Keep in mind that if you bought your memory as a set you'll have to return it as a set for replacement even if one stick is good.

 

[lilou]

Hi Route44,

thanks for your reply. I will run the MemTest per stick.
now I know what is wrong

 

[Route44]

Your welcome and please keep us updated. By the way, that cpu is an excellent one. I, too, run a socket 939 system.

 

[lilou]

Hi Route44,

I checked each stick(2 x 512 Mb, 2 x 1 Gb) individually and found that one
stick 1 Gb had errors and the other 1Gb was not working at all.

I got 2 new 1 Gb(of the same sort) sticks and checked them with MemTest; those were oke. And now the system works oke again.

thanks for your help with this. I will close this topic.

PS. and thanks about your remark on the CPU......