BSOD CCode 50,7a, F4 and d1

[Razeick]

Hey everybody I recently switched my old hard drive to an SSD (OCZ Agility 3 SATA 3 2.5) and am using a Toshiba L745-S4210 but after insatlling I have been having various BSOD, this is the most recent one I already ran Mtest and everything passed. I also attached my minidumps. Thanks for the help

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8000321A080
BCP2: 0000000000000000
BCP3: FFFFF88006E27D83
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\102412-4773-01.dmp
C:\Windows\System32\config\systemprofile\AppData\Local\Temp\WER-8439-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[Tmagic650]

Moving from a standard hard drive to an SSD can be tricky, as you are finding out. The laptops disk controller may not support SSD. Is the SSD configured as AHCI? How big is the SSD? Did you install Windows 7 fresh?

 

[Razeick]

I did a fresh installation of windows 7, the ssd is 240 Gb and I'm sure that the laptop is compatible with the ssd. But I don't know if I configured the ssd as AHCI. How would I check on that?

 

[Razeick]

After looking around I found out that I do have my ssd as AHCI.

 

[Tmagic650]

Okay, sometimes OCZ support can provide better advise with this sort of SSD instability... You can ask if there is a firmware upgrade for the SSD. Try this SSD bench-marking utility:
http://www.filehippo.com/download_asssdbenchmark/