Error stop:0x0000024 need help

Status
Not open for further replies.
I had a corrupted file this morning and when i tried to reboot it crashed. Since then i cant load any windows. Im stuck with some option but when i click them it goes to blue screen and give the error message. I searched about how to fix it but no help. I cant use any floppy. I have os disc but it wont load for some reason. Please help!!!
 
Read: http://support.microsoft.com/default.aspx?scid=kb;en-us;Q228888 (disregard 2000, still applies Xp)

I'd say start with CheckDisk from booting with your Xp CD and then selecting the first R prompt, then press 1, then press Enter.

To log on to the Xp Recovery Console

Then type: chkdsk volume:/f and then press ENTER (substituting your volume name to the Drive letter ie C )
More info here: http://support.microsoft.com/kb/315265

If you don't have your Xp CD, try one of these free CDs

Ultimate Boot CD
http://www.ubcd4win.com/downloads.htm

XP Recovery Console
http://www.thecomputerparamedic.com/files/rc.iso
 
When i reboot with the disk it dosent load it just give me some options. Nothing more. I cant log on to anything atm it just go to blue screen right when it loads window xp. any more ideas?
 
is there an option to go checkdisk. I tried everything but i cant seem to go to the recovery system. Im not sure what to do and have no time to let someone check it atm
 
When i reboot with the disk it dosent load it just give me some options
Try to be clear in your responses, like what options? and any further info.


But to actually start from Boot CD

1. The BootCD must be in the drive
2. The CD must be a Bootable CD
3. The CMOS must be set for CD first boot option (see below)
4. You may receive info "Press any key to boot from CD" Make sure to press a key on the keyboard


Regarding CMOS settings:
When you first turn on your computer, you should notice a prompt like DEL or F2 or F10 to get into CMOS (or Bios, Setup)
Once in Bios settings, locate your computer boot (or start) order
Confirm it is in this sequence
First Boot Device= CD
Second Boot Device= HardDrive

Then Save and Exit (usually by hitting F10 key)

Edit:

Please don't post twice in a row, use Edit instead
 
safe mode sade mode with networking safe mode command promt start windows normally. Tried pressing f10 no option there
 
Status
Not open for further replies.
Back