G31T-M7 Motherboard anomaly

By kevmogs
May 2, 2010
  1. I have just set up a new system using the above motherboard. Initially, I had a 500gb IDE hdd, and a dvd. I used the correct jumper settings on each, but the BIOS recognised the set-up as third primary and slave. I decided to use a SATA hdd, and now the BIOS recognises it secondary slave, and the dvd, jumpers set to master and plugged into the IDE, as third primary. Any ideas as to why?
  2. orondf

    orondf TS Booster Posts: 94

    I have once experienced this on the Asus P4P800-VM.
    All you have to do is to enter the BIOS, and in the screen you see the HDDs/DVDs(usually Main), select the option "IDE Configuration" (or anything similar) and set the "Enhanced Mode On" setting to "SATA".
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...