Hello all
I have this annoying problem with micro sd card from goodram 128GB . I try to format it and I get constant error I/O read only.
I have tried:
chkds - won't work can not even change in cmd to disk letter of sd card
diskpart - tried to use option "clean" or "clean all" - no effect alsow used "attributes disk clear readonly " the operation was succesfull but when I tried to do "clean" again I got "read only" error
I changed the letter of sd card reader to a new one - no effect
Deleted the sd card redaer from the manager and installed it from the begining + update drivers - no effect
Of course checked the switch on card reader - yes it is flipped properly
Is it possible to flash new firmware into this sd card using VID and PID ? I have been looking on the internet for some tool or site with firmware but nothing came out.
I have all the details of the card reader :
Description: [R:]Realtek USB 2.0 Card Reader(Generic- xD/SD/M.S.)
Device Type: Vendor Specific
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 0BDA PID = 0129
Serial Number: 20100201396000000
Device Vendor: Generic
Device Name: USB2.0-CRW
Device Revision: 3960
Manufacturer: Generic-
Product Model: xD/SD/M.S.
Product Revision: 1.00
Controller Part-Number: Unknown
I have this annoying problem with micro sd card from goodram 128GB . I try to format it and I get constant error I/O read only.
I have tried:
chkds - won't work can not even change in cmd to disk letter of sd card
diskpart - tried to use option "clean" or "clean all" - no effect alsow used "attributes disk clear readonly " the operation was succesfull but when I tried to do "clean" again I got "read only" error
I changed the letter of sd card reader to a new one - no effect
Deleted the sd card redaer from the manager and installed it from the begining + update drivers - no effect
Of course checked the switch on card reader - yes it is flipped properly
Is it possible to flash new firmware into this sd card using VID and PID ? I have been looking on the internet for some tool or site with firmware but nothing came out.
I have all the details of the card reader :
Description: [R:]Realtek USB 2.0 Card Reader(Generic- xD/SD/M.S.)
Device Type: Vendor Specific
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 0BDA PID = 0129
Serial Number: 20100201396000000
Device Vendor: Generic
Device Name: USB2.0-CRW
Device Revision: 3960
Manufacturer: Generic-
Product Model: xD/SD/M.S.
Product Revision: 1.00
Controller Part-Number: Unknown
