Solved Google redirect virus help :/ log files attached

[techiehammy]

Ok I saw the other thread on here, the GMER log is missing because it would force my pc to restart or just never finish, my pc gets redirected to sites,
and juest wanted say im new here and I think it is great what you guys are doing here. Just want to say thank you in advance for any help it is greatly appreciated.

I followed the 8-step instructions.
Here are the results

 

[Broni]

Please download ComboFix from Here or Here to your Desktop.

**Note: In the event you already have Combofix, this is a new version that I need you to download. It is important that it is saved directly to your desktop**

1. Please, never rename Combofix unless instructed.
2. Close any open browsers.
3. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.
   • Very Important! Temporarily disable your anti-virus, script blocking and any anti-malware real-time protection before performing a scan. They can interfere with ComboFix or remove some of its embedded files which may cause "unpredictable results".
   • Click on this link to see a list of programs that should be disabled. The list is not all inclusive. If yours is not listed and you don't know how to disable it, please ask.
   NOTE1. If Combofix asks you to install Recovery Console, please allow it.
   NOTE 2. If Combofix asks you to update the program, always do so.
   • Close any open browsers.
   • WARNING: Combofix will disconnect your machine from the Internet as soon as it starts
   • Please do not attempt to re-connect your machine back to the Internet until Combofix has completely finished.
   • If there is no internet connection after running Combofix, then restart your computer to restore back your connection.
4. Double click on combofix.exe & follow the prompts.
5. When finished, it will produce a report for you.
6. Please post the "C:\ComboFix.txt"

**Note: Do not mouseclick combofix's window while it's running. That may cause it to stall**

Make sure, you re-enable your security programs, when you're done with Combofix.

DO NOT make any other changes to your computer (like installing programs, using other cleaning tools, etc.), until it's officially declared clean!!!

 

[techiehammy]

Here it is
Stealth MBR rootkit/Mebroot/Sinowal detector 0.3.7 by Gmer, http://www.gmer.net

device: opened successfully
user: MBR read successfully
kernel: MBR read successfully
detected MBR rootkit hooks:
\Driver\Disk -> CLASSPNP.SYS @ 0x8719e322
\Driver\ACPI -> acpi.sys @ 0x8068bd4c
\Driver\atapi -> ataport.SYS @ 0x807ae9a8
IoDeviceObjectType ->\Device\Harddisk0\DR0 ->user & kernel MBR OK

 

[Broni]

This is not exactly, what I asked for, but it won't hurt to see the above.

Please, proceed with Combofix.

 

[techiehammy]

Oops... sorry I kinda got mixed up on which one to post ._.
here it is thanks for your help ^-^

 

[Broni]

How is redirection?

Delete your GMER file, download fresh one and see, if it'll run now.
Remember:

If for some reason GMER refuses to run, try again.
If it still fails, try to UN-check "Devices" in right pane.
If still no joy, try to run it from Safe Mode.

 

[techiehammy]

I would get redirected every once in a while not all the time, I havent tested yet if its fixed yet so I dont know at the moment, but here is the log
the gmer worked and after it was done made my pc run very very slow, 100% cpu usage had to turn power off with the button,
dont know if thats suppose to happen but , just giving more info if needed

 

[Broni]

Download Bootkit Remover to your Desktop.

• You then need to extract the remover.exe file from the RAR using a program capable of extracing RAR compressed files. If you don't have an extraction program, you can use 7-Zip: http://www.7-zip.org/
• After extracing remover.exe to your Desktop, double-click on remover.exe to run the program (Vista/7 users,right click on remover.exe and click Run As Administrator.
• It will show a Black screen with some data on it.
• Right click on the screen and click Select All.
• Press CTRL+C
• Open a Notepad and press CTRL+V
• Post the output back here.

 

[techiehammy]

Here it is

 

[Broni]

This one looks fine.

Delete your Stealth MBR rootkit/Mebroot/Sinowal detector, download fresh copy and post new log.

 

[techiehammy]

sorry being dense but are you asking to delete bootkit and redownload ? or delete those files on my pc ? if its the deletion of the files you requested i cant seem to find them, would you kindly give me a hint to where they are stored ?

 

[Broni]

No, no....LOL
The log, you posted in your reply #3.

Delete the file, you used and

Download the MBR Rootkit Detector: http://www2.gmer.net/mbr/mbr.exe to your desktop.

* Doubleclick mbr.exe and follow prompts (Vista users: right click on mbr.exe and click "Run As Administrator").
* A black DOS window will quickly appear then disappear.
* When mbr.exe is finished it will create a log on your desktop.
* Copy and paste contents of that log (mbr.log) file to your next reply.

 

[techiehammy]

i dont know how that got past me one of those times to feel stupid lol

Stealth MBR rootkit/Mebroot/Sinowal detector 0.3.7 by Gmer, http://www.gmer.net

device: opened successfully
user: MBR read successfully
kernel: MBR read successfully
user & kernel MBR OK

 

[Broni]

Ehh...don't worry about it
The log looks clean.

Which browser is getting redirected?

Uninstall Combofix:
Go Start > Run [Vista users, go Start>"Start search"]
Type in:
Combofix /Uninstall
Note the space between the "Combofix" and the "/Uninstall"
Click OK (Vista users - press Enter).
Restart computer.

====================================================================

Download OTL to your Desktop.

* Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.
* Under the Custom Scan box paste this in:



netsvcs
drivers32 /all
%SYSTEMDRIVE%\*.*
%systemroot%\system32\Spool\prtprocs\w32x86\*.dll
%systemroot%\system32\*.wt
%systemroot%\system32\*.ruy
%systemroot%\Fonts\*.com
%systemroot%\Fonts\*.dll
%systemroot%\system32\spool\prtprocs\w32x86\*.tmp
%systemroot%\*. /mp /s
/md5start
/md5stop
CREATERESTOREPOINT
%systemroot%\system32\*.dll /lockedfiles
%systemroot%\Tasks\*.job /lockedfiles
%systemroot%\System32\config\*.sav
%systemroot%\system32\user32.dll /md5
%systemroot%\system32\ws2_32.dll /md5
%systemroot%\system32\ws2help.dll /md5
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\Results\Install|LastSuccessTime /rs



* Click the Quick Scan button. Do not change any settings unless otherwise told to do so. The scan wont take long.

• When the scan completes, it will open two notepad windows: OTL.txt and Extras.txt. These are saved in the same location as OTL.
• Please copy (Edit->Select All, Edit->Copy) the contents of these files, one at a time, and post them back here.

 

[techiehammy]

Ok here are the files, I only use firefox and about 20% of my searches on google usually get redirected, some times I get ip banned from google for a while too

 

[Broni]

Your Vista would greatly benefit from adding another 1GB of RAM.

=====================================================================

Please, uninstall Ask Toolbar.

===================================================================

Run OTL

• Under the Custom Scans/Fixes box at the bottom, paste in the following
  
  

  :OTL
  DRV - File not found [Kernel | On_Demand | Stopped] -- C:\Windows\System32\DRIVERS\SymIM.sys -- (SymIMMP)
  DRV - File not found [Kernel | On_Demand | Stopped] -- C:\Users\veronica\AppData\Local\Temp\catchme.sys -- (catchme)
  O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - No CLSID value found.
  O2 - BHO: (no name) - {602ADB0E-4AFF-4217-8AA1-95DAC4DFA408} - No CLSID value found.
  O3 - HKLM\..\Toolbar: (no name) - {7FEBEFE3-6B19-4349-98D2-FFB09D4B49CA} - No CLSID value found.
  O28 - HKLM ShellExecuteHooks: {AEB6717E-7E19-11d0-97EE-00C04FD91972} - Reg Error: Key error. File not found
  [2010/07/03 09:00:29 | 000,000,000 | ---D | C] -- C:\Users\veronica\AppData\Local\ctfefdgck
  [2010/07/03 20:51:29 | 000,000,000 | ---D | M] -- C:\Users\veronica\AppData\Roaming\MarketSamurai.6E37012E1CBD7F47B14488FCC715944F3EBDCEDC.1
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\zdgiwlyx.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\xuodunbd.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\qrdfihjq.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\qkcapdmx.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\ogarmwkb.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\jwfitpfx.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\gqjumuxh.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\dbrvrgzl.sys:changelist
  @Alternate Data Stream - 866 bytes -> C:\Windows\System32\drivers\brkmmjvz.sys:changelist
  
  :Services
  
  :Reg
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center\Monitoring]
  "DisableMonitoring" =-
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile]
  "EnableFirewall" =dword:00000001
  
  
  :Files
  
  :Commands
  [purity]
  [emptytemp]
  [emptyflash]
  [resethosts]
  [Reboot]

• Then click the Run Fix button at the top
• Let the program run unhindered, reboot the PC when it is done
• You will get a log that shows the results of the fix. Please post it.
• Open OTL again and click the Quick Scan button. Post the log it produces in your next reply.

 

[techiehammy]

Ok here or both files the first file is the one after the boot

 

[Broni]

Double check in "Programs & Features" for some older Java versions (other than 6 Update 20).
If you see anything, uninstall.

1. Download Temp File Cleaner (TFC)
Double click on TFC.exe to run the program.
Click on Start button to begin cleaning process.
TFC will close all running programs, and it may ask you to restart computer.


2. Go to Kaspersky website and perform an online antivirus scan.

1. Disable your active antivirus program.
2. Read through the requirements and privacy statement and click on Accept button.
3. It will start downloading and installing the scanner and virus definitions. You will be prompted to install an application from Kaspersky. Click Run.
4. When the downloads have finished, click on Settings.
5. Make sure these boxes are checked (ticked). If they are not, please tick them and click on the Save button:

• Spyware, Adware, Dialers, and other potentially dangerous programs
  [*] Archives
  [*] Mail databases

6. Click on My Computer under Scan.
7. Once the scan is complete, it will display the results. Click on View Scan Report.
8. You will see a list of infected items there. Click on Save Report As....
9. Save this report to a convenient place. Change the Files of type to Text file (.txt) before clicking on the Save button. Then post it here.

 

[techiehammy]

Well here is the kaspersky scan, was kinda of a pain lol people kept closing my browser >_<

 

[Broni]

Nice

OTL Clean-Up
Clean up with OTL:

* Double-click OTL.exe to start the program.
* Close all other programs apart from OTL as this step will require a reboot
* On the OTL main screen, press the CLEANUP button
* Say Yes to the prompt and then allow the program to reboot your computer.

If you still have any tools or logs leftover on your computer you can go ahead and delete those off of your computer now.

================================================================

Your computer is clean

1. We need to reset system restore to prevent your computer from being accidentally reinfected by using some old restore point(s). We'll create fresh, clean restore point.

Turn off System Restore:

- Windows XP:
1. Click Start.
2. Right-click the My Computer icon, and then click Properties.
3. Click the System Restore tab.
4. Check "Turn off System Restore".
5. Click Apply.
6. When turning off System Restore, the existing restore points will be deleted. Click Yes to do this.
7. Click OK.
- Windows Vista and 7:
1. Click Start.
2. Right-click the Computer icon, and then click Properties.
3. Click on System Protection under the Tasks column on the left side
4. Click on Continue on the "User Account Control" window that pops up
5. Under the System Protection tab, find Available Disks
6. Uncheck the box for any drive you wish to disable system restore on (in most cases, drive "C:")
7. When turning off System Restore, the existing restore points will be deleted. Click "Turn System Restore Off" on the popup window to do this.
8. Click OK

2. Restart computer.

3. Turn System Restore on.

4. Make sure, Windows Updates are current.

5. If any Trojan was listed among your infection(s), make sure, you change all of your on-line important passwords (bank account(s), secured web sites, etc.) immediately!

6. Download, and install WOT (Web OF Trust): http://www.mywot.com/. It'll warn you (in most cases) about dangerous web sites.

7. Run defrag at your convenience.

8. Read How did I get infected?, With steps so it does not happen again!: http://www.bleepingcomputer.com/forums/topic2520.html

9. Please, let me know, how is your computer doing.

 

[Broni]

The issue appears to be solved.