Moniter not being detected

[momsgonelooney]

I changed my memory and now I my comp. wont work properly. it's detecting my moniter or key board and it isn't booting correctly. I don't get the little "beep" like I use 2 wen I turn it on.Can some1 plzz help me? I use my comp. for everything. The memory I put in there was recomended by a friend.these r my comp specs.

Field Value
Computer
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)


Motherboard
CPU Type AMD Athlon 64, 2300 MHz (11 x 209)
Motherboard Name Gigabyte GA-K8NS Pro (5 PCI, 1 AGP, 3 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset nVIDIA nForce3 250, AMD Hammer
System Memory 512 MB (PC3200 DDR SDRAM)
BIOS Type Award Modular (05/04/05)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port Printer Port (LPT1)

Display
Video Adapter NVIDIA GeForce FX 5500 (256 MB)
3D Accelerator nVIDIA GeForce FX 5500
Monitor Sampo AlphaScan 871 (000001)

Multimedia
Audio Adapter nVIDIA MCP2-S - Audio Codec Interface

Storage
IDE Controller NVIDIA nForce3 250 Parallel ATA Controller
IDE Controller NVIDIA nForce3 250 Serial ATA Controller
SCSI/RAID Controller Silicon Image SiI 3512 SATALink Controller
Floppy Drive Floppy disk drive
Disk Drive ST3160021A (160 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive Optiarc DVD RW AD-7190A
SMART Hard Disks Status OK

Partitions
C: (NTFS) 152617 MB (105459 MB free)

Input
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse PS/2 Compatible Mouse

Network
Network Adapter Hamachi Network Interface - Kaspersky Anti-Virus NDIS Miniport (5.61.185.65)
Network Adapter Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller (192.168.1.47)
Modem Motorola SM56 Speakerphone Modem

Peripherals
Printer Microsoft XPS Document Writer
Printer Send To OneNote 2007
USB1 Controller nVIDIA MCP2-S - OHCI USB 1.1 Controller
USB1 Controller nVIDIA MCP2-S - OHCI USB 1.1 Controller
USB2 Controller nVIDIA MCP2-S - EHCI USB 2.0 Controller

this is the memeory i put in
Patriot 1GB 184-Pin DDR SDRAM DDR 400 (PC 3200) Desktop Memory

 

[almcneil]

At least one of the RAM chips is bad. Swap the chips until you figure out which one is bad. You can go back to the store and they will exchange it free of charge (they should!)

Best,
-- Andy

 

[momsgonelooney]

ty i will try that and get bac 2 you.

my 15 yr old boy fixed it. he took out a circuit board and cleaned it. the memory was fine. ty for ur help.