No Signal Display

[Eymard]

Hello Guys.

Help me out on my Problem, I Just Build a Unit.

My GPU fan is Rotating but When I PUT-IN the GPU in the Mobo. Monitor Display Says " No Signal"
but when I put out the GPU, the unit is working well.
Does my GPU is dead or I just build a PC without Compatibility ?

Specs:
GPU: Palit GTX1050TI DUAL FAN OC 4GB DDR5
MOBO: GIGABYTE GA-H110M-H
PROCIE: INTEL PENTIUM G4560 7TH GEN
PSU: 620 WATTS TRUE RATED
RAM: 1X1 8GB HYPERXFURY (BLACKED) 2133MHZ DDR4

 

[Cycloid Torus]

Your CPU provides graphics which you may have to "turn off" in order for the 1050Ti to work. In some cases you have to "turn on" the graphics card slot in order to turn off the CPU graphics.

Consult your motherboard manual for the specifics in your case.

 

[Eymard]

Your CPU provides graphics which you may have to "turn off" in order for the 1050Ti to work. In some cases you have to "turn on" the graphics card slot in order to turn off the CPU graphics.

Consult your motherboard manual for the specifics in your case.

I already did the BIOS update, the MOBO specs required to update when the Processor is in the 7th Generation but nothing happen.

 

[Cycloid Torus]

There can be a conflict between CPU w/ graphics and GPU - consult your manual for specifics - usually covered in section about adding a graphics card.

 

[Eymard]

There can be a conflict between CPU w/ graphics and GPU - consult your manual for specifics - usually covered in section about adding a graphics card.

It Solved. Thanks to the Technician GPU works well.