Windows 7 Bluescreen

By robero
Nov 5, 2010
Post New Reply
  1. I had some bluescreens. I tried to reinstall windows but it didnt help.

    Ongelman tunniste:
    Ongelmatapahtuman nimi: BlueScreen
    Käyttöjärjestelmän versio: 6.1.7600.
    Aluekohtaisten asetusten tunnus: 1035

    Lisätietoja ongelmasta:
    BCCode: 3b
    BCP1: 00000000C0000005
    BCP2: FFFFF8800485BC59
    BCP3: FFFFF88007AF3940
    BCP4: 0000000000000000
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Ongelman kuvausta helpottavat tiedostot:

    Lue tietosuojatiedot verkossa:[/url]

    Jos tietosuojatiedot verkossa eivät ole käytettävissä, voit lukea tietosuojatiedot myös offline-tilassa:
  2. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    If you have any minidump files since reinstalling Windows...

    How to find and post your Minidump Files:

    My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

    It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don’t need to zip them, just attach as is. Please do us a favor and don’t Zip each one individually.
  3. robero

    robero TS Rookie Topic Starter

    Bluescreen files

    Here is 5 of the dmp files.

    Attached Files:

  4. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    Your issue is with memory corruption. Therefore you’ll need to run memtest on your RAM.

    See the link below and follow the instructions. There is a newer version than what is listed; use the newer. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

    Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.

    There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

    If you have errors you have corrupted memory and it needs to be replaced.

    Step 2 – Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


    * Get back to us with the results.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...