Fixed manually associating with SSIDs that contain a space or special
Fixed manually associating with networks that have a wireless password
containing special characters
Updated WPS PIN attack prevention behavior
Updated various web UI errors
Updated Danish translations
Updating the firmware on your My Net Wi-Fi Range Extender
These instructions represent a manual update.
IMPORTANT: Do not interrupt the firmware upgrade process. Doing so may cause
the device to malfunction or unable to boot. If you are using the manual update
method, do not rename the firmware file. Doing so will cause the manual update
to fail and can corrupt the system.
Download the firmware to your desktop
Unzip the file and save it to your desktop.
Open a web browser and type in http://wdrangeextender or http://wdrangeextender.local
(Mac) to get to the login screen of your extender.
Enter your username and password and click the Login button at the main
login screen if you have secured your device previously with a password. The
default username is admin, and the default password is password.
From the main dashboard screen, click Advanced Settings.
Click Admin, under the Firmware Update tab.
Click the Choose File button.
Browse to the location where you saved the firmware file and select it.
Click Upload button and then click the Ok button to proceed with the
firmware update. Once the process is complete, the device will reboot. This
process will take a few minutes.
Here's other similar drivers that are different versions or releases for different operating systems: