Can anyone interpret this minidump?

By plzhelpme1234
Aug 7, 2008
  1. Hi!

    My computer randomly reboots at some point with a blue screen. As such, I followed the instructions I found in this forum to open a minidump file.

    However, I don't know what it means and was hoping that someone more experienced with these matters could explain what is wrong with my computer.

    Any help would be greatly appreciated!!!

    Here is the output i got:

    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arg1: 00000000, memory referenced
    Arg2: 00000002, IRQL
    Arg3: 00000000, value 0 = read operation, 1 = write operation
    Arg4: 862718ea, address which referenced memory

    Debugging Details:

    *** WARNING: Unable to verify timestamp for NETw4x32.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETw4x32.sys

    READ_ADDRESS: 00000000


    862718ea f3a5 rep movs dword ptr es:[edi],dword ptr [esi]




    PROCESS_NAME: vsmon.exe

    LAST_CONTROL_TRANSFER: from 862481e4 to 862718ea


    STACK_ADDR_RAW_STACK_SYMBOL: ffffffffb5082624

    STACK_COMMAND: dds B5082624-0x20 ; kb

    b5082604 b5082618
    b5082608 86294914
    b508260c b5082684
    b5082610 00000004
    b5082614 00000001
    b5082618 85b431a8
    b508261c b5082634
    b5082620 b8b13d05 NETw4x32+0x7d05
    b5082624 85b431a8
    b5082628 89cad728
    b508262c b5082674
    b5082630 88f0a448
    b5082634 b5082674
    b5082638 b8ba0c9d NETw4x32+0x94c9d
    b508263c 88f0a460
    b5082640 000000d0
    b5082644 00000000
    b5082648 b5082658
    b508264c 0000001c
    b5082650 b508269c
    b5082654 b50826c0
    b5082658 b50826ec
    b508265c 86250983
    b5082660 86294914
    b5082664 b5082a14
    b5082668 b5082a14
    b508266c b50828a0
    b5082670 b5082a08
    b5082674 b50826c0
    b5082678 b8b0cc07 NETw4x32+0xc07
    b508267c 88f0a448
    b5082680 b50826ec

    b8b13d05 ?? ???

    SYMBOL_NAME: NETw4x32+7d05

    FOLLOWUP_NAME: MachineOwner


    IMAGE_NAME: NETw4x32.sys


    FAILURE_BUCKET_ID: 0xD1_NETw4x32+7d05

    BUCKET_ID: 0xD1_NETw4x32+7d05

    Followup: MachineOwner
  2. woody1191

    woody1191 TS Rookie Posts: 572

    The causes for a 0xD1 error are normally Bad Device Drivers or Faulty RAM.
    The Driver cited is "NETw4x32.sys" which seems to be a Network Driver. Try updating your Network Drivers and try running Memtest86 as well.

    Memtest86 Instructions
    Download the pre-built version of Memtest86 (Link Below) and burn it onto a CD using ISO Recorder (Link Below) after this boot off the CD and start the test going and let it run for 3-5 hours (Minimum of 7 Passes) or Overnight which is best.

    Memtest86 -
    ISO Recorder -
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...