My compaq r3000z cto failed to boot this morning. The fans and hard drive spin up. The display only shows random pixels, no bootup text whatsoever. I have removed the hard drive, cdrom, and memory and still nothing. I press f10 to enter the CMOS setup and get no graphics there either. I am afraid it may be the system board. Any ideas would be appreciated. Thanks
Compaq presario r3000z cto boot problems
- Thread starter keith alexander
- Start date
- Status
Tmagic650
Posts: 17,233 +234
This post belongs in "Mobile Computing" because the Compaq R3000z is a laptop computer...
regardless, it is probably the system board like you say. Heat has probably destroyed the motherboard. You could take it into a repair shop or take it apart yourself and see if you can clean the CPU cooling fan(s) and the cooling fins. It may be just a failed fan or motherboard
regardless, it is probably the system board like you say. Heat has probably destroyed the motherboard. You could take it into a repair shop or take it apart yourself and see if you can clean the CPU cooling fan(s) and the cooling fins. It may be just a failed fan or motherboard
- Status
Similar threads
