Dell BIOS password removal
- Thread starter Ididmyc600
- Start date
Hello everyone,
this is my first post at techspot.com. I'd like to congratulate everyone here at techspot for this great site and effort you put on this community and for all the great job you've done 'til today as i've read through many posts here.
Ok, my problem. My aunt bought me a dell inspiron 8000 for my birthday; she doesn´t know anything about computers but she's a great lady, i really apreciate this gift. She gave it to me and as i powered it on i saw the bios password screen. I started reading across this site about this password thing and decided to try that shorting method. I located the chip labeled 24WC02J on the board and proceeded to short 3rd and 6th pins...nothing...when i short and power on laptop goes off right after powering on. If i do the shorting pin by pin on 3rd and 6th using the paragon shorter with the 3rd pin it powers on but still that pass screen...with the 6th pin it goes off just after powering on. So i guess the shorting method won´t work for me...
So i was wondering if rustam could help me out...man i know you are really busy out there but if you just got a minute for me i'd really apreciate it...the service tag for this laptop is #8ZNHC01-595B
Also i looked down the laptop and service tag and express labels have been teared off so i dont know the express code. i just got this service tag from that bios password screen.
I just want to use this laptop for my school subjects...i can´t afford a new one and i just really need to use this one...it is in such good shape...
please Rustam...if you could have a minute for me...
this is my first post at techspot.com. I'd like to congratulate everyone here at techspot for this great site and effort you put on this community and for all the great job you've done 'til today as i've read through many posts here.
Ok, my problem. My aunt bought me a dell inspiron 8000 for my birthday; she doesn´t know anything about computers but she's a great lady, i really apreciate this gift. She gave it to me and as i powered it on i saw the bios password screen. I started reading across this site about this password thing and decided to try that shorting method. I located the chip labeled 24WC02J on the board and proceeded to short 3rd and 6th pins...nothing...when i short and power on laptop goes off right after powering on. If i do the shorting pin by pin on 3rd and 6th using the paragon shorter with the 3rd pin it powers on but still that pass screen...with the 6th pin it goes off just after powering on. So i guess the shorting method won´t work for me...
So i was wondering if rustam could help me out...man i know you are really busy out there but if you just got a minute for me i'd really apreciate it...the service tag for this laptop is #8ZNHC01-595B
Also i looked down the laptop and service tag and express labels have been teared off so i dont know the express code. i just got this service tag from that bios password screen.
I just want to use this laptop for my school subjects...i can´t afford a new one and i just really need to use this one...it is in such good shape...
please Rustam...if you could have a minute for me...
howard_hopkinso
Posts: 21,238 +17
snoopi said:
If you don`t stop promoting razik, you too will be banned.
By all accounts, the guy`s a fraudster.
I`ll say it again for the umpteenth time.
Anyone who comes to Techspot asking for payment for passwords, will be banned immediately.
Is that clear enough for you?
If anyone really wants to pay for password removal, don`t do it through Techspot.
Guys, until someone else comes along who will help you for free, the only persons you can trust are _rustam/Paragon33/Ididmyc600/Obi.
Regards Howard
Nice One Admin
Nicely said Admin.. I hope the people who are promoting Razik gets that message... STAY CLEAR OF RAZIK... I also had a pm from snoop promoting Razik.lol. Well this site is still awsome and thanks for the help guys..
Still waiting on Rustam to help me generate a password...
Service Tag:#H6TDL1S-595B
Express Service code: 37417439440
just thoguht ill post it again.. Thanks Team!!!
howard_hopkinso said:If you don`t stop promoting razik, you too will be banned.
By all accounts, the guy`s a fraudster.
I`ll say it again for the umpteenth time.
Anyone who comes to Techspot asking for payment for passwords, will be banned immediately.
Is that clear enough for you?
If anyone really wants to pay for password removal, don`t do it through Techspot.
Guys, until someone else comes along who will help you for free, the only persons you can trust are _rustam/Paragon33/Ididmyc600/Obi.
Regards Howard
Nicely said Admin.. I hope the people who are promoting Razik gets that message... STAY CLEAR OF RAZIK... I also had a pm from snoop promoting Razik.lol. Well this site is still awsome and thanks for the help guys..
Still waiting on Rustam to help me generate a password...
Service Tag:#H6TDL1S-595B
Express Service code: 37417439440
just thoguht ill post it again.. Thanks Team!!!
Fingers crossed...... my daughter's C600 suddenly has the bios password set.
Tag # G5CN70J-595B
I (and she) would be really grateful for help
Tag # G5CN70J-595B
I (and she) would be really grateful for help
howard_hopkinso
Posts: 21,238 +17
yannara said:Maybe this guy is hungry for a ban?
Thanks for letting us know.
Regards Howard
DELL LATITUDE D500
#3NZDY0J
595B
is this enough?
tnx in advance
#3NZDY0J
595B
is this enough?
tnx in advance
Howard,
Why do you think I promoting that sick fraudster? I NEVER did any of this. I don't even know that razik. I came to the site to ask for technical help and that's all I wanted to do here at techspot. Please read the facts first before you go around threathening me thru the email you sent me today. That's not very friendly or professional of yours. That fraud pmed me and I deleted it right away. I was hoping Mr Rustam would reply to my post last week but nothing came out.
Howard, please show me your appreciation about the fact that I stricly respect the rules of Techspot. Thank you and have a nice day!!!
Why do you think I promoting that sick fraudster? I NEVER did any of this. I don't even know that razik. I came to the site to ask for technical help and that's all I wanted to do here at techspot. Please read the facts first before you go around threathening me thru the email you sent me today. That's not very friendly or professional of yours. That fraud pmed me and I deleted it right away. I was hoping Mr Rustam would reply to my post last week but nothing came out.
Howard, please show me your appreciation about the fact that I stricly respect the rules of Techspot. Thank you and have a nice day!!!
howard_hopkinso
Posts: 21,238 +17
I don`t know where you got the idea that I emailed you. But I certainly did no such thing.
I can`t see any reason why I would.
Perhaps, you`re mistaken?
I`ve just checked through my sent emails and you`re not on it.
Regards Howard
I can`t see any reason why I would.
Perhaps, you`re mistaken?
I`ve just checked through my sent emails and you`re not on it.
Regards Howard
If I only had a brain.....
K, first I read it was the 3 and 5 prongs on this eeprom chip that you short, then someone mentioned the 3 and 6 prongs....which is it? Please .....only if you are sure....I can guess and I don't want to hear it if its a guess. Also, I never got any kind of reply to: What kind of damage can this procedure do if its done improperly?
Thank you Thank you Thank you
K, first I read it was the 3 and 5 prongs on this eeprom chip that you short, then someone mentioned the 3 and 6 prongs....which is it? Please .....only if you are sure....I can guess and I don't want to hear it if its a guess. Also, I never got any kind of reply to: What kind of damage can this procedure do if its done improperly?
Thank you Thank you Thank you
howard_hopkinso
Posts: 21,238 +17
Hey, no worries mate.
Obviously just a mistake and no harm done.
Regards Howard
Obviously just a mistake and no harm done.
Regards Howard
hi imfromjupiter,
as far as i'vre read in the site link removed in the shorting method section it is 3rd and 6th pins. Also studer13 mention in one of the early threads of this subject that he succeed on reseting his inspiron 8000 with this shorting method on pins 3 and 6...though, i have an inspiron 8000 and haven't succeeded yet....hope info helps you.
regards,
luigui.
as far as i'vre read in the site link removed in the shorting method section it is 3rd and 6th pins. Also studer13 mention in one of the early threads of this subject that he succeed on reseting his inspiron 8000 with this shorting method on pins 3 and 6...though, i have an inspiron 8000 and haven't succeeded yet....hope info helps you.
regards,
luigui.
Dell D620 bios password
Hi this is Alfredo from Mexico and own a Dell D620 with bios password protection. I just tried to open up the computer an locate where I can make a shorto circuit on it to clear the eeprom from it, but it's really hard to find it. I already talked to Dell and try to obtain a Password for my ST, but they didn't want to help me. Could somebody help me. Rustam, Ididmyc600 or Paragon33. Please help, I'm just tired of looking a way to make the Notebook to work.
My ST is: DV0X7B1-595B
Express Service Code: 30174170941
Hope there's a way to clear up this password. I already downloades de DST software but there's no way I can make it boot from it. It always appear the gray screen first of the ST. Thanks guys and hope you can help me.
Greetings to all the people that help other people in this kind of problems.
Hi this is Alfredo from Mexico and own a Dell D620 with bios password protection. I just tried to open up the computer an locate where I can make a shorto circuit on it to clear the eeprom from it, but it's really hard to find it. I already talked to Dell and try to obtain a Password for my ST, but they didn't want to help me. Could somebody help me. Rustam, Ididmyc600 or Paragon33. Please help, I'm just tired of looking a way to make the Notebook to work.
My ST is: DV0X7B1-595B
Express Service Code: 30174170941
Hope there's a way to clear up this password. I already downloades de DST software but there's no way I can make it boot from it. It always appear the gray screen first of the ST. Thanks guys and hope you can help me.
Greetings to all the people that help other people in this kind of problems.
rustam_! Yet another supplicant! (There should really be a separate thread for "people begging rustam_ for help)
I gather from everything I've read online that you are the ONLY person to go to for a 595B master password. A client of mine got a Dell laptop from ebay, and, surprise surprise, locked BIOS - also, since the configuration information is invalid, it will not boot up at ALL. Just goes to the grey screen of despair. The service tag is #HCX50B1-595B, and it's an Inspiron 6400. Could you please help me? Thanks!
I gather from everything I've read online that you are the ONLY person to go to for a 595B master password. A client of mine got a Dell laptop from ebay, and, surprise surprise, locked BIOS - also, since the configuration information is invalid, it will not boot up at ALL. Just goes to the grey screen of despair. The service tag is #HCX50B1-595B, and it's an Inspiron 6400. Could you please help me? Thanks!
Ookay, just noticed people are including another piece of data in requests, so I might as well, too.
Once again, It's a Dell Inspiron 6400 laptop
Service Tag #HCX50B1-595B
Express Service Code 37786554829
Thanks!
Once again, It's a Dell Inspiron 6400 laptop
Service Tag #HCX50B1-595B
Express Service Code 37786554829
Thanks!
Wow, that post is so going to be deleted soon. Geez, I'm gonna be paid maybe $40 CDN by my client for this, why in heaven's name would I pay $100 to get a password I'll be paid $40 for? I'm sure they don't supply "free passwords for everyone" because they're BUSY. Go away, razzik.
Similar threads
Latest posts
-
A laptop GPU now leads the Valve Steam survey, AMD CPUs reach all-time high- Squid Surprise replied
-
Astronomers spot possible Planet Nine in data spanning 23 years- TheBigT42 replied
