Alright so I have a Lenovo IdeaCentre k450. The problem I am experiencing is whenever I turn on my computer it will beep twice and then have a FULLY black screen. I already tried reseting the CMOS which perhaps failed because the menue didnt even appear on my monitor. I am sure that it is not a problem existing in my monitor. If anyone could help thatd be greatly apreciated. Thanks
Lenovo laptop problem
- Thread starter Noah Vocus
- Start date
Cycloid Torus
Posts: 4,892 +1,711
See beep codes for lenovo at https://support.lenovo.com/us/en/documents/ht062270
Your 2 beeps mean something - just uncertain until you identify type of BIOS (AMI, Award, etc)
This may help too https://support.lenovo.com/us/en/documents/migr-4xvqal
Your 2 beeps mean something - just uncertain until you identify type of BIOS (AMI, Award, etc)
This may help too https://support.lenovo.com/us/en/documents/migr-4xvqal
I have tried going into my CMOS settings and they dont even show up on the screen.
Cycloid Torus
Posts: 4,892 +1,711
I understand you have a black screen. I am suggesting that you determine which Bios you do have (based on your model, perhaps from Lenovo support, etc) and then determine what the '2 beeps' means.
I do not own your model, so cannot help with the specifics. It could be a RAM error or a need to reset CMOS setup or something else.
To access Bios, I believe you need to hold down F1 and turn power on.
I do not own your model, so cannot help with the specifics. It could be a RAM error or a need to reset CMOS setup or something else.
To access Bios, I believe you need to hold down F1 and turn power on.
Similar threads
