BSOD Bad pool header

[George12341]

hello everyone I have a new computer with windows 7 ultimate running and everytime the pc stays many hours closed when I open it it gives me a blue screen with the BAD POOL HEADER message. when I manage to open the windows I get this description :
BCCode: 19
BCP1: 0000000000000003
BCP2: FFFFFA8003C5DAB0
BCP3: FFBFFA8003C5DAB0
BCP4: FFFFFA8003C5DAB0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


C:\Windows\Minidump\122409-17503-01.dmp
C:\Users\Giwrgos\AppData\Local\Temp\WER-29686-0.sysdata.xml

at my first visit at the store they told me that did some BIOS updates and at the second that there was a problem with motherboard and they replaced it with a new one.
please some advices, George

 

[George12341]

And this is the MiniDump folder

 

[George12341]

sorry for the post in wrong thread before

after 4 hours blue screen with System Service Exception

BCCode: c0000221
BCP1: FFFFF8A00026CD60
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

 

[Route44]

One error simply cited a Windows driver which too general to be of much help. The other cited pool corruption which tells us the driver pool is corrupted but nothing definitive was given as to the cause.

One error is 0x00000019: BAD_POOL_HEADER
A pool header issue is a problem with Windows memory allocation. Device driver issues are probably the most common, but this can have diverse causes including bad sectors or other disk write issues, and problems with some routers.

The other error is 0xC0000221: STATUS_IMAGE_CHECKSUM_MISMATCH
Indicates driver problems, system file problems, disk corruption problems (such as a damaged pagefile), or faulty memory hardware.

In light of these errors I suggest you do the following diagnostics:

1. Scan for infections.

2. Do a harddrive diagnostics by utilizing the free utility from your HD manufacturer that you should be able to find on their website. Make sure you do both short and long tests.

3, Run memtest on your RAM. This is free and quite safe. Do the following and don't short change any of the steps, i.e. the minimum # of Passes required.

See the link below and follow the instructions. There is a newer version than what is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


Link: https://www.techspot.com/vb/topic62524.html


* Get back to us with the results.

 

[sooraj]

i got two deffrerent blue screen error can enyone help me
1roblem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000099
BCP2: 000000000003A517
BCP3: 0000000000000002
BCP4: 000000000003A503
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


2: Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000003
BCP2: FFFFFA800328C410
BCP3: FFFFF8000D211DB0
BCP4: FFFFF8000D211DB0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\050910-28610-01.dmp
C:\Users\sooraj\AppData\Local\Temp\WER-39296-0.sysdata.xml

 

[Archean]

@sooraj

Please open a new thread in BSOD section and describe your problem there; also post your minidumps for analysis. You can find these in C:\windows\minidump. if there are multiple minidump files just zip them together in a single file and attached with your thread's first post. Regards