EMachine video out

By prhode
Jan 29, 2008
  1. A friend of mine has an eMachine T5026 and his video has died. He is trying to replace the video with a PCI video card and the monitor turns itself off after booting up. The video card that is in the machine is integrated into the motherboard and we cannot figure out to make it see the pci card instead. He can view the screen in safe-mode only. Can any help me please.
  2. raybay

    raybay TS Evangelist Posts: 7,241   +10

    The eMachine motherboard is the T-5026 has a large number of reported early failures.
    You can usually go to Start->Control Panel->System->Hardware->Device Manager and disable the existing PCI Video, then attempt to install the replacement after a reboot. It is sometimes wisest to download the drivers first, and install them so you know where they are... then you the device manager to load them after you are certain the old install in the Device Manager has been disabled.
  3. prhode

    prhode TS Rookie Topic Starter

    thank you

    I will try that when we get back together to work on this thing.
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...