insanewhitekid
Posts: 13 +0
I was replacing a fan in my case because it made a high pitched sound. I took it out to test it to make sure there wasnt too much pressure from the screws inside the case that were causing this noise. I unplugged one of the molex connectors from my gfx card to test it. It still made the sound so i plugged the molex back into the 2 molex to 6 pin connector and the computer shut off immediatly. Now when i hold down or just push the on button my led flashes and fans spin and stop repeatedly. Any Help would be just the best thing right now.
~Thank you
Matt
~Thank you
Matt