overhaeting with e machine

By duffguy
Sep 8, 2005
  1. The temps below .... is that overheating for a e machine? I know they get hot
    very very easily so i was just makin sure is it?

    Field Value
    Sensor Properties
    Sensor Type Analog Devices ADM1027 (SMBus 2Eh)

    Motherboard 42 °C (108 °F)
    CPU 57 °C (135 °F)
    Aux 47 °C (117 °F)
    Seagate ST380011A 45 °C (113 °F)

    Cooling Fans
    CPU 1756 RPM
    System 1225 RPM

    Voltage Values
    CPU Core 1.32 V
    +2.5 V 1.50 V
    +3.3 V 3.30 V
    +5 V 5.03 V
    +12 V 11.63 V
  2. vnf4ultra

    vnf4ultra TechSpot Paladin Posts: 1,388

    A little warm, but if you have a prescott core cpu, then it's normal.

    You're not in danger as is.
  3. duffguy

    duffguy TS Rookie Topic Starter Posts: 125

    those were my cuzis one but check out mine mien never went this high before!
    Field Value
    Sensor Properties
    Sensor Type Winbond W83697HF (ISA 290h)
    Chassis Intrusion Detected No

    Motherboard 44 °C (111 °F)
    CPU 50 °C (122 °F)
    WDC WD1600JB-00GVA0 47 °C (117 °F)

    Cooling Fans
    CPU 2394 RPM
    I have another case fan but it dont detect it
    Voltage Values
    CPU Core 1.50 V
    +3.3 V 3.33 V
    +5 V 5.00 V
    +12 V 11.73 V
    -12 V -11.54 V
    -5 V -1.03 V
    +5 V Standby 4.97 V
    VBAT Battery 3.14 V
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...