Problem with everest diagnostics and benchmarking program

[tpw]

I notice it wont show my cpu temp stable changes real fast and some it dont never change at all i just recently had new motherboard put in could this be the problem.

 

[AlbertLionheart]

First you should try uninstalling the software and reinstalling it
Otherwise it might be a faulty sensor on the board.

 

[tpw]

if i just had a new motherboard put in do they mean it bad or the shop did it install right. that i need to carry back. because shop mess up some other stuff also like my computer cant window update no more.

 

[AlbertLionheart]

If the shop installed a new board for you then it is most likely that it is a faulty board. Also, a new board will mean a new install of your O/S so if you cannot get downloads it may not be a pukka copy.

 

[tpw]

is cpu temp and sys temp post show the same thing.

On sensorview pro i notic my cpu temp change real fast and random like it not accurate it be at 40 than go 27 than 3 and keep going why is it doing doing this but my sys temp is steady.

here is what my sensorview pro screen show.

and also notic in setting and when go cpu i can pick reading from 3 sensor

Ok on speedfan it have two temp 1 why dont sensorview dont or everest and also temp 1,2 ,3 which one is cpu ,sys or aux reading. here is what speedfan read

ImageShack - Hosting :: rrghwm0.png

And on everest it do the same thing sensorview pro cpu temp move around .

here everest reading

Field Value
Sensor Properties
Sensor Type ITE IT8705F (ISA 290h)

Temperatures
Motherboard 10 °C (50 °F)
CPU 14 °C (57 °F)
Aux 39 °C (102 °F)
WDC WD800JB-00JJA0 36 °C (97 °F)

Cooling Fans
CPU 2679 RPM

Voltage Values
CPU Core 1.52 V
+2.5 V 1.57 V
+3.3 V 3.20 V
+5 V 5.05 V
+12 V 10.37 V
+5 V Standby 4.70 V
VBAT Battery 3.20 V

Also just had biostar p4m80-m4 put in if it matter.

here is what speedfan show http://img239.imageshack.us/my.php?image=rrghwm0.png

 

[howard_hopkinso]

Threads and posts merged.

 

[AlbertLionheart]

Your PSU volts are way off - check them with another diagnostic tool and if they are the same, replace the PSU as soon as possible. Low voltage can do more damage than high sometimes.

 

[tpw]

ok i went into PC HEALTH STATUS and this is what it show

shutdown temp 85c /176f
cpu vcore 153
+3.3v 3.20 v
+5.0 5.10
DRM Voltage 2.59v
voltage battery 3.21v
Current Cpu Temp 70 c
current Cpu Fan speed 2636
current system fan speed 0 rpm

when i was in setup all i see was bios upgrade yes or no so should i have update or upgrade it .

my specs of my computer

Windows: Windows XP5.1 (Build 2600) Service Pack 2
Internet Explorer: 6.0.2900.2180
Memory (RAM): 511 MB
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
CPU Speed: 2990.9 MHz
Sound card: C-Media Wave Device
Display Adapters: NVIDIA GeForce FX 5200 | NetMeeting driver | RDPDD Chained DD
Screen Resolution: 1024 X 768 - 16 bit
:
Network Adapters: ADMtek ADM8511 USB To Fast Ethernet Converter - Packet Scheduler Miniport | Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport
CD / DVD Drives: D: TEAC DW-552G
:
COM Ports: COM1
LPT Ports: LPT1
Mouse: 5 Button Wheel Mouse Present
Hard Disks: C: 74.5GB
Hard Disks - Free: C: 7.8GB
USB Controllers: 5 host controllers.
Firewire (1394): Not Detected
:
Manufacturer: American Megatrends Inc.
Product Make: P4IPE
:
AC Power Status: OnLine
BIOS Info: ATAT COMPATIBLE 091004 A M I 9000410
Time Zone: Eastern Standard Time
Battery: No Battery
Motherboard: soyocomputer P4IPE
Modem: Not detected

upgraded to biostar p4m80-m4 motherboard

the batterry supply all i really see it says Lc-b350atx

voltage v-115v ,input 230v
current v-8a ,input 4a
frequency 60hz-50hz

v=== +3.3 voltage,-5v/-12/+5vsb current/ ps-on/pik/com
output 28a/35a/16a voltage , 0.3a/0.8a/2a, frequency remote /pg/return
max 200w/192w voltage,15w/9.6/10w
330w

+5v & + 3.3v combine 200w max = s&3.3v & +12v
co,bined 330w max. total out put 350w MAX

 

[tpw]

any body alse.

 

[AlbertLionheart]

Maybe I missed something here, but how many PCs are there logs for? Do I see a desktop and a laptop?

 

[tpw]

just desktop those are just different i try to use to get my temp reading and nothing working right it look like.

 

[AlbertLionheart]

ok - have you replaced the PSU?

 

[tpw]

When i went to pc health status and got my temp was that in bios getting my temp.

 

[tpw]

can any body help with this problem.

 

[bushwhacker]

tpk, thank you for the pm.

Did you follow the AlbertLionheart's post? You will need to reinstall windows, because in the most case you cannot swap the motherboard with the existing OS. You have to reformat it, so you can use it fully and in stable way. Please try this before posting this complicated problem.

 

[Daveskater]

if reinstalling windows doesn't work then do as AlbertLionheart suggested and replace your power supply

the voltages are way too low if these readings are correct

before replacing your power supply, though, back up your important files onto an external or slave hard drive and format your hard drive and install windows

if you would like detailed instructions on how to do this then don't hesitate to ask

 

[bushwhacker]

I suggest you to go with Daveskater's suggestion.

 

[tpw]

ok cool could it also be the program just not right for my system because i took it back to the shop to fix some other stuff and he said the bios temp is right just program temp not reading.

 

[bushwhacker]

Do you understand that he will charge you for that?

 

[tpw]

na free but he claim the program just not working right how to show small video of what is on your monitor . i only know how to do a screen pic.

 

[bushwhacker]

Well, did you ask him to test the power supply?

 

[Daveskater]

tpw has been pm'ing me so i've decided to bring this thread back to life again

here's our conversation:

Hi you reply to my thread how sure are that it most likely psu that is my problem.

from the information you gave, the voltages that your power supply is giving out are way too low

don't change your power supply yet though, reinstall windows first and see if that fixes your problem

for instructions see here

I believe that was already reinstall when my new mother board got put in and also if do that would i lose all my video music and files.

you have to back up all the files you want to keep then do the reinstall

you cannot put in a new motherboard and keep the same operating system install, this is most likely what is causing your problem

back up onto an external hard drive or dvd's etc then reinstall windows following the instructions i gave you

u think the peoople at the computer maybe used a external hard drive to my stuff on and reinstall it and put my stuff back or not likely because also when i got computer back i could do window update they install some software to get to update with out saying failed. do you have aim or some type instant message if so what your name.

i've told him a couple of times to back his data up onto an external hard drive and reinstall windows but he doesn't seem to understand