System keeps on restarting

By x3sanfg · 5 replies
Nov 28, 2009
  1. sorry for my poor grammar first =)

    my com was dell
    but nvr check the version

    and i had a problem which the com keep on restart
    when it come to the loading screen..
    i try disable auto restart by pressing F8 and BSOD
    then restart again but it cant run the reformat disc again
    and i cant even go to my acc cos it keep on restart..
    i suspect is a hardware problem.. u guys have any suggestion or someone who noe how to fix to teach mi..
    and even safe mode, safe mode wif cmd, safe mode (forgot le) or last good (forgot)
    oso keep on restart
    i dun mind reformat, or buying disc..
  2. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    For clarification: Does it run in Safe Mode?
  3. x3sanfg

    x3sanfg TS Rookie Topic Starter

    Even safe mode oso cannot run.. i try to reformat but still nothing happened
  4. dipo003

    dipo003 TS Enthusiast Posts: 37

    hello x3sanfg,
    I dont know where u are from but i advise that you try to be clear enough with your English
    To help the situation-check if there is google translator your language and translate so that all of us can understand better
  5. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    Okay, then do the following:

    1. Make sure your cables are firmly attached to all components like harddrive, DVD drives, etc.

    2. Run Memtest on your memory. This test takes over the moment your system boots up.

    See the link below and follow the instructions. There is a newer version than is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

    Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

    If you have errors you have corrupted memory and it needs to be replaced.

    Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


    * Get back to us with the results.
  6. x3sanfg

    x3sanfg TS Rookie Topic Starter

    Ya, i get an error when i test the ram. but now com if fine cos its being repair =) but thx for yr help =) =)
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...