I just finished a new build for my computer and cant get it to start up. It starts for a few seconds and all the fans begin to run but the video is never displayed. The video card seems to be working, the fan spins. After it starts and runs for a maybe 15 seconds it shuts it self down and tries to boot up again only to repeat the process. I tried removing the video card to see if that was the problem but it still did the same thing. The power supply seems to be fine. Any ideas?
Here is whats on the inside:
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor
LG 20X DVD±R DVD Burner w/ SecurDisc Tech Black SATA
Western Digital Caviar Green WD10EADS 1TB SATA 3.0Gb/s Hard Drive
CORSAIR XMS2 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
KINGWIN Mach 1 ABT-700MA1S 700W ATX / BTX SLI Certified CrossFire Ready Modular
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
SAPPHIRE 100259L Radeon HD 4870 512MB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card
LINKSYS WMP54G 32bit PCI2.2 Wireless-G Adapter
RiDATA NSSD-S25-32-C04MPN 2.5" 32GB SATA II 3.0Gb Internal Solid state disk
Here is whats on the inside:
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor
LG 20X DVD±R DVD Burner w/ SecurDisc Tech Black SATA
Western Digital Caviar Green WD10EADS 1TB SATA 3.0Gb/s Hard Drive
CORSAIR XMS2 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
KINGWIN Mach 1 ABT-700MA1S 700W ATX / BTX SLI Certified CrossFire Ready Modular
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
SAPPHIRE 100259L Radeon HD 4870 512MB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card
LINKSYS WMP54G 32bit PCI2.2 Wireless-G Adapter
RiDATA NSSD-S25-32-C04MPN 2.5" 32GB SATA II 3.0Gb Internal Solid state disk
