Problems installing Athlon XP 3200+ to a Asus A7N8X rev 1.04 motherboard.

By RMR ยท 6 replies
Jun 23, 2005
  1. I can get the CPU to work but it seems to run at half speed. I changed the jumper. Updated the Bios to 1008. changed the Bios to 200Mzh. Need some help please.
  2. kol_indian

    kol_indian TS Rookie Posts: 316

    hello and welcome to techspot :wave: :wave:

    u have not mentioned what clock speed it is running now please do mention that
  3. IronDuke

    IronDuke TS Rookie Posts: 856

    Things aren't always what they seem.

    I await your answer to Kol's question.
  4. Charles Hammond

    Charles Hammond TS Rookie Posts: 59

    Not all revision 1 worked at 400 Mhz.
    I think there was a jumper for 400 Mhz on some of these.
  5. RMR

    RMR TS Rookie Topic Starter

    Fist of all this is a A7N8X rev 1.04 not a deluxe just a A7N8X rev 1.04. heh just to make that clear. Now I set the jumper to 200Mhz i belive is what it sets to. Its on Pin 2 and 3. In the my computer properties its says that its running at 1.10Ghz half of what is should i belive.

    Thanks for the help.
  6. Didou

    Didou Bowtie extraordinair! Posts: 4,274

    Any revision below the 2.0 isn't meant to run a 200mhz FSB CPU. If you still want to try it out, go look for some modded BIOS files which you can find HERE.

    Remember that you're doing these experiments at your own risk.
  7. JimShady23

    JimShady23 TS Maniac Posts: 373

    Try Setting it manually in the bios

    Check in your bios and see if there is a setting to bump the fsb to 200 mhz. If it only goes to 166 then your SOL no matter what the jumper says.
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...