Radeon 9200 card crashing

[shaunl]

Hi Guys,
First post here - so HI!

Ok, I have a Radeon 9200 graphics card in a P4 ASUS P4S800 mobo.

I have two machines - same specs and each are crashing.

This is what happens:

1. screen freezes.
2. Screen corruption - blurry lines
3. screen refreshes and system can be used again.
4. ATI Catalyst Centre informs me there has been a crash and an error report will be sent.
5. Graphics are really slow (moving a window across the screen is done in jagged slow movements instead of one quick smooth motion for example).
6. We reboot to get the system back to normal state

We work in a home office on 2 pcs and this has been happening for 5 weeks now. It can happen once a day, three times, seven times a day! v. annoying.

The following are links:
1. vidcap of screen corruption as the crash event happens.
2. video in wmv format (800kb) of the crash event taken with a minidv. excuse the reflection of me with the cam holding a biscuit!

Further down the page is system information. I have noticed in it that the asus graphics mobo processor is enabled (sis) - is it possible that there is a conflict between the radeon and the sis processor?

Your thoughts and any pointers would be most helpful.

Cheers


Name RADEON 9200 SERIES
PNP Device ID PCI\VEN_1002&DEV_5964&SUBSYS_7C26174B&REV_01\4&1AFFAA3D&0&0008
Adapter Type RADEON 9250/9200 Series AGP (0x5964), ATI Technologies Inc. compatible
Adapter Description RADEON 9200 SERIES
Adapter RAM 128.00 MB (134,217,728 bytes)
Installed Drivers ati2dvag.dll
Driver Version 6.14.10.6614
INF File oem39.inf (ati2mtag_RV280 section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1440 x 900 x 60 hertz
Bits/Pixel 32
Memory Address 0xF0000000-0xF7FFFFFF
I/O Port 0x0000D800-0x0000D8FF
Memory Address 0xD7800000-0xD780FFFF
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6614, 1.47 MB (1,540,608 bytes), 2004-08-04 3:29 PM)

Name RADEON 9200 SERIES - Secondary
PNP Device ID PCI\VEN_1002&DEV_5D44&SUBSYS_7C27174B&REV_01\4&1AFFAA3D&0&0108
Adapter Type RADEON 9250/9200 Series Secondary AGP (0x5D44), ATI Technologies Inc. compatible
Adapter Description RADEON 9200 SERIES - Secondary
Adapter RAM 128.00 MB (134,217,728 bytes)
Installed Drivers ati2dvag.dll
Driver Version 6.14.10.6614
INF File oem39.inf (ati2mtag_RV280 section)
Color Planes Not Available
Color Table Entries Not Available
Resolution Not Available
Bits/Pixel Not Available
Memory Address 0xE0000000-0xFEBFFFFF
Memory Address 0xD7000000-0xD7FFFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6614, 1.47 MB (1,540,608 bytes), 2004-08-04 3:29 PM)




I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller

I/O Port 0x000003C0-0x000003DF SIS Processor to AGP Controller
I/O Port 0x000003C0-0x000003DF RADEON 9200 SERIES

IRQ 20 Microsoft ACPI-Compliant System
IRQ 20 SiS 7001 PCI to USB Open Host Controller

Memory Address 0xD7000000-0xD7FFFFFF SIS Processor to AGP Controller
Memory Address 0xD7000000-0xD7FFFFFF RADEON 9200 SERIES - Secondary

Memory Address 0xE0000000-0xFEBFFFFF SIS Processor to AGP Controller
Memory Address 0xE0000000-0xFEBFFFFF RADEON 9200 SERIES - Secondary

IRQ 19 SiS 900-Based PCI Fast Ethernet Adapter
IRQ 19 SoftV92 Data Fax Modem

Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF SIS Processor to AGP Controller
Memory Address 0xA0000-0xBFFFF RADEON 9200 SERIES

I/O Port 0x000003B0-0x000003BB SIS Processor to AGP Controller
I/O Port 0x000003B0-0x000003BB RADEON 9200 SERIES

 

[nickc]

"Further down the page is system information. I have noticed in it that the asus graphics mobo processor is enabled (sis) - is it possible that there is a conflict between the radeon and the sis processor?"

no it is not possible, that is not your problem...